User manual

Problem Possible cause Remedy
There is no good perform-
ance of the cleaning proce-
dure.
You did not remove the ac-
cessories from the appli-
ance before the start of the
cleaning procedure. They
can compromise the steam
cycle and decrease the per-
formance.
Remove the accessories
from the appliance and re-
peat the function.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
13. INSTALLATION
WARNING!
Refer to Safety chapters.
13.1 Building in
During installation in
combustible matter, NIN SEV
1000 and fire protection
guidelines and regulations of
the Association of Cantonal
Fire Insurance shall be strictly
adhered to.
1. Pull the appliance drawer out as far as
it goes and remove it.
2. Place the appliance in front of the
recess and connect the mains plug.
Make sure the cable is free when you
slide the appliance.
3. Push the appliance into the recess.
A = appliance, N = recess
A
A
A
A
D
A
435
mm
60
mm
170
mm
105
mm
A
757 mm
N 762
mm
A 567
mm
N 605
mm
A 548 mm
N 550 mm
5 / 6 =
635 mm
6 / 6 =
762 mm
~50 mm
4. Use a minimum of 2 screws to attach
the oven on the 2 sides (A).
ENGLISH
35