INSTRUCTION BOOK COMMERCIAL FREEZER EC 2709N EC 5109N GB 820 41 76 16
GB CONTENTS SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 page Warnings and Guidelines INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 page Position Electrical connections Switching On Fitting wheels HOW TO USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GB SAFETY INSTRUCTIONS WARNINGS AND GUIDELINES This freezer is heavy. Take care when moving it. These warnings are provided to improve safety, and should be read carefully before installing or using your freezer. If the freezer is fitted with a lock to prevent tampering by children, the key must always be kept safely out of the reach of children, and far away from the freezer. IMPORTANT It is vital that these instructions are kept with the freezer for future use.
GB INSTALLATION POSITION Place the freezer horizontally on a firm surface, resting on all four wheels. The room should be dry and adequately ventilated. Temperatures of the external environment have an impact on the energy consumption of the device. Therefore: - do not put the device to a place exposed to sunshine ore besides a radiator or oven, - put it to a place where the temperature of the environment corresponds to the climatic classification for which the device was designed.
GB INSTALLATION FITTING WHEELS The wheels are fitted as shown in the drawing, using the enclosed fitting key. If the freezer is equipped with wheels with brake, you can brake the freezer by pushing the brake down and you can loosen it by pushing it up as shown in the figure. To ensure the stabilization of the freezer you have to brake two wheels at the same time.
GB HOW TO USE PACKAGING AND POSITIONING Food must be frozen before placing into the freezer. Food must be packed in airtight and moisture-proof packaging to pevent it from drying out. Never fill the freezer to more than 5 mm below the top edge. TEMPERATURE CONTROL The thermostat ensures that the required temperature is maintained in the freezer. Adjust the temperature by turning the button with a coin that fits the groove. Turning the thermostat button towards no.
GB MAINTENANCE DEFROSTING HOW TO CLEAN YOUR FREEZER INSIDE The formation of frost on the inside of freezers cannot be avoided. Frost is formed when moisture contained in the air comes into contact with the cold surfaces of the freezer. Consequently, the lid should only be opened when necessary, and it should never be left open. A thin layer of ice or frost does not affect the function of the freezer adversely, and can be removed carefully using the scraper provided.
Printed by Xerox Hungary Ltd. 2003. 11. 26.