User manual

Problem Possible cause Solution
The temperature of the
room that contains the ap-
pliance is too high for effi-
cient operation.
Try to reduce the tempera-
ture in the room where the
appliance stands.
The High tempera-
ture alarm light is
on.
It is too warm inside the
freezer.
Refer to "High Temperature
Alarm".
The cabinet has been re-
cently switched on and the
temperature is still too
high.
Refer to "High Temperature
Alarm".
There is too much
frost and ice.
Products are not wrapped
properly.
Wrap the products better.
The lid is not shut properly
or do not close tightly.
Check if the lid closes well
and the gaskets are un-
damaged and clean.
The temperature is not set
correctly.
Set a warmer temperature.
The water drainage plug is
not correctly positioned.
Position the water drainage
plug in the correct way.
The lid doesn't close
completely.
There is excessive frost. Eliminate excess frost.
The lid gaskets are dirty or
sticky.
Clean the lid gaskets.
Food packages are block-
ing the lid.
Arrange the packages in
the right way, see the stick-
er in the appliance.
The lid is difficult to
open.
The lid gaskets are dirty or
sticky.
Clean the lid gaskets.
The valve is blocked. Check the valve.
The lamp does not
work.
The lamp is defective. Refer to "Replacing the
lamp".
It is too warm in the
freezer.
The temperature is not set
correctly.
Set a lower temperature.
The lid does not close
tightly or it is not shut
properly.
Check if the lid closes well
and the gasket is undam-
aged and clean.
Before freezing the appli-
ance was not precooled
sufficiently.
Pre-cool the appliance for
enough time.
ENGLISH 11