User manual

flashes on the indicator and by pressing the
button again it is possible to change it.
You confirm the choice of the temperature
by pressing the Confirmation button. The
temperature indicator shows again the in-
side compartment temperature.
The set temperature will be reached within
24 hours.
After a long period out of use it is not nec-
essary to set again the temperature be-
cause it remains stored.
WARNING!
During the stability period by the
first starting the temperature dis-
played can not correspond to the
setting temperature. During this
time it is possible that the tempera-
ture displayed is different than the
setting temperature.
Difference between the tempera-
ture displayed and temperature
setting is normal. Especially when:
• a new setting has recently been selected
• the door has been left open for a long
time
• warm food has been placed in the com-
partment
Difference until 5°C inside the compartment
are quite normal.
During normal functioning the indicator
shows the warmest temperature inside the
compartment.
FUNCTIONS MENU
By activating the Function button the func-
tions menu is operating. Each function
could be confirmed by pressing Confirma-
tion button . If there is no confirmation after
some seconds the display will go out from
the menu and return in normal condition.
The following functions are indicated:
Excessive temperature alarm
Child Lock function
Eco Mode function
Frostmatic function
Drinks Chill function
EXCESSIVE TEMPERATURE
ALARM
An increase in the temperature in a com-
partment (for example due to an power fail-
ure) is indicated by:
• flashing the alarm and freezer tempera-
ture indicators
• sounding of buzzer
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
When you press the Confirmation button to
de-activate the alarm, the highest tempera-
ture reached in the compartment appears
on the temperature indicator for some sec-
onds.
Then it returns on the normal operation
showing the temperature of the selected
compartment.
During the alarm phase, the buzzer can be
switched off by pressing the Confirmation
button.
Possible causes of alarm:
• Large volume of fresh food was inserted.
• The lid has been left open for a long
time.
• Any other defect of the system. See the
table in "Troubleshooting".
CHILD LOCK FUNCTION
The Child Lock function is activated by
pressing the Function button (several times
if necessary) until the corresponding icon
appears
.
You must confirm the choice by pressing
the Confirmation button within few sec-
onds. You will hear the buzzer and the icon
remains lighted. In this condition any possi-
ble operation through the keys does not
cause any change as long as this function
is activated.
It is possible to de-activate the function at
any time by pressing the Function button
until the corresponding icon will flash and
then the Confirmation button.
ECO MODE FUNCTION
The Eco Mode function is activated by
pressing the Function button (several times
if necessary) until the corresponding icon
appears
(or setting the temperature at
-18°C).
8
www.electrolux.com