User manual

If the ambient temperature is
lower than +10°C there is a
risk for condensation on the
surface. This gives an
increased risk for corrosion
which is not covered by
warranty. To minimize the
risk please be sure to clean
this condensation and
provide free air circulation
around the appliance.
The plug should be
accessible after installation.
8.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
8.3 Ventilation requirements
The airflow behind the appliance must be
sufficient.
1. Put the freezer in horizontal position
on a firm surface. The cabinet must
be on all four feet.
2. Make sure that the clearance
between the appliance and rear wall
is 5 cm.
3. Make sure that the clearance
between the appliance and the sides
is 5 cm.
9. TECHNICAL DATA
9.1 Technical data
Height mm 876
Width mm 1336
Depth mm 667,5
Rising time Hours 31
Voltage Volts 230 - 240
Frequency Hz 50
The technical information are situated in
the rating plate on the external side of
the appliance and in the energy label.
10. ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it. Help protect the
environment and human health and to
recycle waste of electrical and electronic
appliances. Do not dispose appliances
marked with the symbol with the
household waste. Return the product to
your local recycling facility or contact
your municipal office.
ENGLISH 13