User Manual

NOTE: It is good practice to:

Fit an Earth Leakage Circuit Breaker to your

house wiring.

Wire your appliance to the latest IEE regulations.

THINGS TO NOTE

This appliance is designed to be fitted between

cabinets with the recommended dimensions as

shown in Fig. 3 & 4.

If there is an existing housing unit it must be

removed.

The dimensions given provide adequate air

circulation around the unit within the cabinet,

ensuring compliance with BS EN60-335.

This appliance must not be installed on a

wooden base board.

Enquiries regarding the installation of the cooker

point if required should be made to your

Regional Electricity Company to ensure

compliance with their regulations.

The cooker point should be within 2m of the

appliance to make it accessible to switch off the

appliance in case of an emergency.

To protect the hands wear gloves when lifting

the oven into its housing.

NOTE: HOUSE CIRCUIT

Earth leakage / continuity tests must be carried out

before the appliance is connected to the mains

supply and re-checked after fitting.

INSTALLATION INSTRUCTIONS

Fig. 3

Fig. 4