User manual

20
Drying results un-
satisfactory.
Wrong programme se-
lected.
Select a different pro-
gramme the next time you
dry (see “Overview of pro-
grammes” section).
Lint filter clogged. Clean lint filter.
Heat exchanger clogged
with lint.
Clean heat exchanger.
Incorrect volume of
laundry.
Observe recommended
loading volumes.
Ventilation slots in base
area covered up.
Uncover ventilation slots in
base area.
Residue on inside sur-
face of drum or drum
ribs.
Clean inside surface of
drum and drum ribs.
Conductance of water at
installation site differs
from standard setting of
machine.
Re-programme standard
setting for degree of drying
(see ‘Programming op-
tions’ section).
Loading door does
not close.
Fine strainer not in place
and/or large mesh filter
not locked in place.
Install fine strainer and/or
snap large mesh filter into
place.
When pressing a
button, the corre-
sponding button
flashes several
times.
Washing protection. Af-
ter the start of the pro-
gramme, the option can
no longer be set.
Turn the programme knob
to OFF (AUS). Set the pro-
gramme again.
Drum light does not
work.
Programme selector in
OFF (AUS) position.
Turn programme selector
to LIGHT (BELEUCH-
TUNG) or to any pro-
gramme.
Defective lamp.
Replace lamp (see next
section).
Programme inac-
tive, EMPTY WATER
(BEHÄLTER) dis-
play illuminated.
Condensate tank is full.
Empty condensate tank,
then start programme with
START/PAUSE button.
Problem Possible cause Remedy