User manual

Problem Possible solution
Load is too small, increase the load or
use the Time Drying programme.
The cycle time is too long or unsatisfacto‐
ry drying result.
1)
Make sure that the weight of the laundry
is suitable for the duration of the pro‐
gramme.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry
in the washing machine again.
Ensure that the room temperature is
higher than +5°C and lower than +35°C.
Optimal room temperature is 18°C to
25°C.
Set the Time Drying or the Extra Dry pro‐
gramme.
2)
The display shows .
If you want to set a new programme, de‐
activate and activate the appliance.
Make sure that the options are suitable
for the programme.
1)
After maximum 6 hours, the programme ends automatically.
2)
It can happen that some area remains humid when drying big items (e.g. bed sheets ).
If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The Heat Exchanger is clogged.
• There was too much laundry in the
appliance.
• The drum is dirty.
• Incorrect setting of the conductivity
sensor ( See chapter " Settings -
Adjustment of the remaining laundry
moisture degree " for better setting).
• The airflow slots are clogged.
• Room temperature is too low or too
high ( optimal room temperature 18°C
to 25°C )
13. TECHNICAL DATA
Height x Width x Depth 850 x 596 x 630 mm (maximum 659 mm)
Max. depth with the appliance door open 1104 mm
Max. width with the appliance door open 958 mm
Adjustable height 850 mm (+ 15 mm - feet regulation)
Drum volume 118 l
Maximum load volume 8 kg
Voltage 220-230 V
ENGLISH 19