User manual

40 electrolux removing transport safety equipment
Removing transport safety equipment
Caution! Before first starting up, all
parts of the transport safety
equipment must be removed.
1. Open loading door
2. Pull off adhesive strips from inside
machine on top of drum.
3. Remove foil hose and polystyrene
padding from the machine.
Electrical connection
Details on mains voltage, type of current
and the fuses required should be taken
from the type plate. The type plate is fit-
ted near the loading aperture (see “Ma-
chine description” section).
Important:
The plug must be accessible after the
appliance has been installed.