user manual Iron Aid EDI97170W
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Important safety information Environment Product description Control panel What is shown in the display Before first use Sorting and preparing laundry Starting up for the first time Iron AidTM Steam System Starting an Iron AidTM programme 2 4 5 6 6 6 7 7 8 12 Drying Starting a drying programme Drying rack Cleaning and maintenance What to do if ...
electrolux 3 • Danger of explosion: never tumble dry items that have been in contact with inflammable solvents (petrol, methylated spirits, dry cleaning fluid and the like). As these substance are volatile, they could cause an explosion. Only tumble dry items washed with water. • Risk of fire: items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in the tumble dryer.
electrolux • Garments which have been in contact with volatile petroleum products should not be machine dried. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine. • When using dry-cleaning sets: only use those products which are declared as suitable for the dryer by the manufacturer. • Clean the micro-fine filter and fine strainer after each drying cycle or Iron Aid programme.
electrolux 5 • Your dryer will function most economically if you: – always keep the ventilation slots on the base of the dryer unobstructed; – use the loading volumes specified in the programme overview; – ensure you have good ventilation in the installation room; – clean the micro-fine filter and fine strainer after each drying cycle; – spin the laundry well before drying. Energy consumption depends on spinning speed set in washing machine. Higher spinning speed - lower energy consumption.
electrolux Control panel 1 2 3 5 1 2 3 4 4 6 – FILTER – CONTAINER 5 Function buttons 6 START/PAUSE button Programme knob and On/Off switch Display DELAY TIMER button Maintenance displays – HEAT EXCHANGER What is shown in the display 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 2 3 4 5 6 7 8 LOAD DRYNESS Start time preselection Drying Iron Aid programme Cooling Anticrease Degree of dryness Display 9 10 11 12 13 14 15 Steam Filter indicator DELICATE Child safety device Steam water tank indicator BU
electrolux 7 Sorting and preparing laundry Sorting laundry • Sort by fabric type: – Cotton/linen for programmes in COTTONS programme group. – Mixed fibres and synthetics for programmes in the SYNTHETICS programme group. Drying in the tumble dryer possible in principle Dry at normal temperature Important! Do not place in the appliance any wet laundry which is not specified on the care label as being suitable for tumble-drying.
electrolux 2. Load your laundry (do not force it in/ overload the machine). Caution! Be careful not to trap laundry in between the loading door and rubber seal. 3. Close loading door securely. Lock must audibly lock. Iron AidTM Steam System Fill water tank You must fill up the water tank before using an Iron Aid programme for the first time.
electrolux 9 To activate recirculation set valve to the ON position. To do that: 1. Pull drawer containing condensed water container out a little (1). Behind the drawer there is water tank’s filler neck (2). max 2 4. Push filler neck and drawer with condensed water container back in. When dry, all textiles not specifically prohibited in the chapter ‘Sorting and preparing laundry’ may be treated with the Iron Aid Steam System.
Additional functions / options BUZZER Application/properties LOAD Programmes max. load (weight when dry) 10 electrolux COTTON 3.0 kg • • For smoothing cotton garments. Min. 80% natural fibres (cotton, linen etc). wet, dry SYNTHETICS 1.5 kg • • For smoothing easy-care garments. Max. 20% natural fibres (cotton, linen etc). wet, dry REFRESH 2.5 kg • • For one suit or up to two suit jackets or pairs of trousers or similar garments. Also suitable for removing odours.
electrolux 11 Programme COTTON SYNTHETICS COTTON SYNTHETICS REFRESH LOAD Loading volume MIN MED MAX 1 - 2 shirts MIN MED MAX 1 - 2 shirts MIN MED MAX 0.5 - 1 kg MIN MED MAX 0.2 - 0.5 kg MIN MED MAX 1 pair of trousers 3 - 4 shirts DURATION dry [min.]1) DURATION wet [min.]1) 20-23 41-51 14-17 24-49 13-16 53-64 12-16 43-53 5 - 6 shirts 3 - 4 shirts 5 - 6shirts 1 - 2 kg 2 - 3 kg 0.5 - 1 kg 1 - 1.
electrolux Important: If in doubt, always select a lower steam level first until you have more experience with load volumes, fabric types and the corresponding optimum steam level. If too high a steam level is selected, garments may lose their shape. If too low a steam level is selected, creases may remain. Selecting additional functions The additional functions available for the Iron Aid programmes are BUZZER, DELAY and the CHILD LOCK. 1. Select the programme and additional functions. 2.
electrolux 13 If the water tank indicator lights up when you select an Iron Aid programme, the programme cannot be started. You will need to fill the water tank first (see section on ‘Cleaning and maintenance,filling water tank’.) It is normal for the appliance to make noises during an Iron Aid or drying programme if garments with hard parts, such as metal buttons, are put in the drum.
BUZZER DELICATE DRYNESS TIME Additional functions / options max. load (weight when dry) Programmes 7 kg • • • - Thorough drying of thick or multilayered fabrics, e.g. terry towelling items, bathrobes. CUPBOARD 7 kg • • • - Thorough drying of fabrics of even thicknesses, e.g. terry towelling items, knitwear, towels. DAMP 7 kg • • • - For normal thickness cotton or linen laundry, e.g. bedding, table linen .
electrolux 15 level MIN, MED or MAX. In the case of a drying cycle with relatively dry laundry, the length of the programme cycle displayed at the beginning is corrected after a while. Caution! Caution: Make sure that by selecting the DRYNESS function, you do not over-dry your wool or silk. Selecting additional functions You can choose from the additional functions DRYNESS, DELICATE, BUZZER and TIME (if a TIME programme has been selected).
electrolux Changing a programme To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to O OFF and then reset the programme. The programme can no longer be changed directly once the programme has started. If you nevertheless attempt to change the programme with the programme knob or an additional function button (except the BUZZER button), the START/PAUSE button and will flash in the multi-display.
electrolux 17 – Spread the garment out in the rack and roll it up, without squashing or folding it. – Place sport shoes on the rack. 4. Select the required programme run time, selectable with an interval of 10 min, from 30 min. up to 180 minutes. Press the TIME button as many times as necessary until the required programme running time is shown in the display. 5. Press the START/PAUSE button. The programme is started. 6.
electrolux 3. After a period of time, a patina due to detergent residue on laundry forms on the filters. When this occurs, clean the filters with warm water using a brush. Remove the filter from the door pulling it out. It can be positioned with the tooth facing to the left or to the right). After cleaning do not forget to put it back. 1 2 2. Clean the valve/filter under warm water. 4. Remove fluff from lint filter, preferably using a damp hand for this purpose. 5. Replace the filter. 3.
electrolux 19 light up. In order to continue the programme, the condensed water container must first be emptied. remove any residues and small pieces of fluff. Warning! The condensed water is not suitable for drinking or for preparing foodstuffs. 1. Pull drawer containing condensed water container all the way out (1) and pull up the condensed water container’s drainage pipe as far as it will go (2). 2.
electrolux 8. Replace heat exchanger and lock into place (turn both lock washers outwards until they snap into place). 9. Close door in plinth. The appliance will not operate if the HEAT EXCHANGER indicator is still lit. Caution! Never operate the dryer without the heat exchanger. Cleaning the drum 5. Use the handle to pull the heat exchanger out of the base and carry it horizontally to prevent any remaining water from spilling. Caution! Do not use abrasives or steel wool to clean the drum.
electrolux 21 After a IronAid programme, garments are not sufficiently smooth. Wrong programme selected (e.g. SYNTHETICS instead of COTTON). Note the composition of the fabric. Too low a LOAD level set. Set a higher LOAD level. Too many garments in machine, or garments that are too different. Load the machine with fewer garments, or only similar ones. Clothes are not removed until the anti-crease phase is finished.
electrolux Empty Condensed water container , then start programme with START/PAUSE button. Programme inactive, CONTAINER display illuminated. Condensed water container is full. Drying cycle ends shortly after programme starts. ANTICREASE display illuminated. Select time programme or higher Not enough washing loaded or EXTRA instead washing loaded is too dry for selec- drying level (e.g. ted programme. of CUPBOARD). Drying cycle lasts an unusually long time.
electrolux 23 Weight when empty Loading volume (depends on approx. 46 kg programme)1) max. 7 kg Voltage 230V Required fuse 10A Total power 2350 Energy efficiency class B Energy consumption (7 kg of cotton, predrained at 1000 rpm) 2) 3,9 Use Domestic Permissible ambient temperature + 5°C to + 35°C Consumption values The consumption values have been established under standard conditions. They may deviate when the machine is operated in domestic circumstances.
electrolux Hints for test institutes Parameters possible to checked by the Test Institutes: • Energy consumption (corrected with final humidity) during the cupboard dry cotton cycle with nominal load. • Energy consumption (corrected with final humidity) during the cupboard dry cotton cycle with half load.
electrolux 25 Electrical connection Details on mains voltage, type of current and the fuses required should be taken from the type plate. The type plate is fitted near the loading aperture (see “Product description” chapter). Warning! The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions. Should the appliance power supply cable need to be replaced, this must be carried out by our Service Center.
electrolux 5. 6. 7. 8. 9. 10. the other side having rotated the block through 180°. Unscrew hinge A from the loading door, rotate through 180°, re-insert on the opposite side and screw down. Re-insert cover plates B on the opposite site having first rotated them through 180°. Unscrew cover plates D from the front of the machine, rotate through 180°, screw on the opposite side. Unscrew door lock E, push down slightly and remove from the front of the machine.
electrolux 27 PNC: S No:
www.electrolux.