User manual

4
Grease filter saturation led
The LED marked F warns you when the grease filter needs
to be cleaned.
This LED flashes to warn you that the grease filters must be
cleaned.
Generally, these must be cleaned after 40 hours of use.
Read the maintenance instructions provided for the grease
filters.
Carbon filter saturation led
The LED marked C indicates carbon filter needs to be
replaced.
This must be done after approximately 160 hours of use.
Read the instructions provided for replacing the carbon
filter.
To restore the LED for the filter
warnings.
After cleaning of the grease filter and exchange of the
carbon filter, press button A for about 3 seconds until the
LED F stops flashing.
Correct ventilation
If the cooker hood should be working correctly there must
be an underpressure in the kitchen. It is important to keep
the
kitchen windows closed and have a window in an adjacent
room open.
Important to know
Not applicable for recirculation. Great care must be taken if
the hood is used at the same time as a burner or fireplace
(e.g. gas, diesel, coal or wood heaters, water heaters, etc.), as
the hood will expel air which is required by these other
appliances. Attend to it by opening a window. The negative
pressure in the room must not exceed 0,04 mbar to prevent
fumes being drawn back into the room by the cooker hood.