User manual

9
11.Fix temporarily the lower section of the chimney to the
upper with two screws. Fig. 11.
12. Fix the lower part of the hood to the structure complex.
Fig. 11.
13.Connect the control panel to the motor. Fig. 11.
14. Connect the lamps. Fig. 11.
15.Remove the grease filter if already in place and fix
definitively the structure to the lower part of the hood
with f4 screws.Fig.12.
16. Remove the screws as on step 11 and fix the lower
section of the chimney to the lower section of the hood
with 2 screws. Fig. 12.
Check if everything works OK!
11
12
12
12
12
14
11
13
13
12
15
15
16
16
Fig. 11
Fig. 12