User manual

1010
1010
10
electr electr
electr electr
electr
oluxolux
oluxolux
olux maintenance and care
GB
CharChar
CharChar
Char
coal filtercoal filter
coal filtercoal filter
coal filter
• The charcoal filter should only be
used if you want to use the hood in
recirculation mode.
• To do this you will need an original
charcoal filter (available from your
local Service Force Centre).
•
RrRr
RrRr
Rr
eplacing the chareplacing the char
eplacing the chareplacing the char
eplacing the char
coal filtercoal filter
coal filtercoal filter
coal filter
The charcoal filter cannot be washed
nor regenerated.
The charcoal filter should be replaced
every 4 months under normal use.
Replacement filters are available from
your local Service Force Centre.
•
Fitting:Fitting:
Fitting:Fitting:
Fitting:
Remove the grease filters.
Fit the charcoalfilters over the motor.
Align the pins RAlign the pins R
Align the pins RAlign the pins R
Align the pins R on the cowl with the
slots Sslots S
slots Sslots S
slots S, then turn the filter clockwise
until it locks in place.
Refit the grease filters.
•
TT
TT
T
o ro r
o ro r
o r
emoveemove
emoveemove
emove proceed in the reverse
order.
• Always specify the hood model code
number and serial number when
ordering replacement filters. This
information is shown on the rating
plate located on the inside of the unit.
• The charcoal filter can be ordered
from your local Service Force Centre.
R
S
S
R