Manual

ManualsBrandsElectrolux ManualsHoodsEFC90244X

1818

1818

18

electr electr

electr electr

electr

oluxolux

oluxolux

olux installation

GB

••

••

• Apply flues support bracket to the wall

touching the ceiling. Use the flues

support bracket as a perforation dia-

gram (the small slot in the support

must coincide with the line previously

drawn on the wall, if present), and

mark two holes with a pencil. Make

the holes and insert 2 dowels.

••

••

• Fix the flues support bracket to the

wall with 2 screws.

Fig.4Fig.4

Fig.4Fig.4

Fig.4

Fig.4Fig.4

Fig.4Fig.4

Fig.4

G

Ø 8

Ø 5x45

••

••

• Hang the hood to the two upper

screws.

••

••

• Introduce and screw the screws (and

washer(s)) up into the hole(s) for the

definitive fixing (

COMPULSORCOMPULSOR

COMPULSORCOMPULSOR

COMPULSOR

Y!!Y!!

Y!!Y!!

Y!!).

Then, having checked the setting of

the hood, TIGHTEN ALL THE upper

and lower SCREWS.

Fig.5Fig.5

Fig.5Fig.5

Fig.5

Note:Note:

Note:Note:

Note: the lower fixing points are vis-

ible removing the fats filters and they

are at the sides and/or at the centre

of the hood (after having removed the

frame of the carbon filter, if present,

in the latter case).

In any case, we recommend using

the lateral holes, when available, to

increase the stability of the hood.

Fig.5Fig.5

Fig.5Fig.5

Fig.5