USER MANUAL EFC90620
We were thinking of you when we made this product
electrolux 3 EN IMPORTANT SAFETY INFORMATION 4 YOUR APPLIANCE 5 OPERATING INSTRUCTIONS 6 MAINTENANCE AND CLEANING 9 SOMETHING NOT WORKING 13 GUARANTEE/CUSTOMER SERVICE 14 GUARANTEE CONDITIONS 15 INSTALLATION INSTRUCTIONS 17 ELECTRICAL CONNECTIONS 18 INSTALLING THE COOKER HOOD 19 EN Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future.
electrolux IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY INFORMATION EN These warnings are provided in the interests of your safety. Ensure that you understand them all before installing or using this appliance. Your safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department. Installation • Any installation work must be undertaken by a qualified electrician or a competent person.
YOUR APPLIANCE electrolux 5 YOUR APPLIANCE EN
electrolux OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. EN Cooker Hood Controls The hood can be switched on pushing directly onto the requested speed without firstly having to select 0/1 button Touch Basic functions control Dual Function L When briefly pressed it switches the lighting system on and off. When pressed for 2 seconds it starts the lighting system in “courtesy light” mode.
electrolux OPERATING INSTRUCTIONS T3 EN T4 T5 F By a brief pressing the motor is set to the second Touch control lit Second speed on speed. By pressing the touch control for approximately Flashing touch Delay function on 2 seconds the Delay function is enabled, i.e control delayed shutdown of the appliance ensuring a complete elimination of the residual odours. This function can be activated at OFF-position and at 1°, 2° and 3°speeds.
OPERATING INSTRUCTIONS electrolux 8 To Operate Select the required fan speed and light if required. Recirculation In the recirculation mode the contaminated air enters the cooker hood through the grease filters. The air is cleaned by passing through the charcoal filters before being passed back into the kitchen through the grilles in either side of the chimney stack.
electrolux MAINTENANCE AND CLEANING MAINTENANCE AND CLEANING Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. EN The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard. External Cleaning Wipe the cooker hood frequently with warm soapy water using a mild detergent. Never use scouring pads or abrasive cleaners. Never use excessive amounts of water when cleaning particularly around the control panel.
electrolux MAINTENANCE AND CLEANING Cleaning of the Metal Cassette Filters Alarm reset • Stop the motor. • Press the F -touch control for at least EN 4 seconds until the T1 -touch control flashes. Cleaning the filters • Filters can be washed in the dish machine. They need to be washed every 2 months or even more frequently in case of particularly intensive use of the hood. • Pull the suction panel to open it.
MAINTENANCE AND CLEANING electrolux 11 Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. Replacing the Charcoal Filter EN This filter cannot be washed or regenerated, and must be replaced when the F touch control starts to flash, or at least once every 4 months. The alarm is only triggered when the motor is on.
electrolux MAINTENANCE AND CLEANING Changing the Halogen Light • Remove the snap-on lamp cover by levering it from under the metal ring, supporting it with one hand. • Remove the halogen lamp from the EN lamp holder by pulling gently. • Replace the lamp with a new one of the same type, making sure that you insert the two pins properly into the housings on the lamp holder. • Replace the snap-on lamp cover. Replacement filters and light bulbs can be obtained from your local Service Force Centre.
SOMETHING NOT WORKING electrolux 13 SOMETHING NOT WORKING If, having followed these instructions carefully, your cooker hood fails to work properly please carry out the following checks. EN Symptom The cooker hood will not start The cooker hood is not working effectively The cooker hood has switched off during operation If after all these checks, the fault persists, contact your local Service Force Centre, quoting the model and serial number.
electrolux GUARANTEE/CUSTOMER SERVICE GUARANTEE/CUSTOMER SERVICE Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of the purchase EN this Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity supply state
GUARANTEE CONDITIONS electrolux 15 GUARANTEE CONDITIONS Customer Care For general enquiries concerning your Electrolux appliance, or for further information on Electrolux products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.electrolux.co.
electrolux www.electrolux.com à Albania EN +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 Tirane Belgique/België/Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek Česká republika +420 2 61 12 61 12 Budějovická 3, Praha 4, 140 21 Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 Fredericia Deutschland +49 180 32 26 622 Muggenhofer Str. 135, 90429 Nürnberg Eesti +37 2 66 50 030 Mustamäe tee 24, 10621 Tallinn España +34 902 11 63 88 Carretera M-300, Km.
INSTALLATION INSTRUCTIONS electrolux 17 INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way.
electrolux ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS THIS APPLIANCE MUST BE EARTHED Electrical Requirements EN Any permanent electrical installation must comply with the latest I.E.E. Regulations and local Electricity Board regulations. For your own safety this should be undertaken by a qualified electrician e.g. your local Electricity Board, or a contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting (NICEIC).
INSTALLING THE COOKER HOOD electrolux 19 INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood. Installation Requirements Before installation check the wall to which the cooker hood is to be fitted for electric cables, water pipes or gas.
electrolux INSTALLING THE COOKER HOOD The cooker hood is made up of the following components: Ref Qty Product Components 1 1 Hood body, complete with EN controls, lighting, fan and filters. 2 1 Telescopic Chimney comprising: 2.1 1 Upper section 2.2 1 Lower section 3 1 Extensions metal 9 1 ø150-120 Ducting spigot 10 1 ø120-125 Ducting flange Flange ø150 10 1 14.1 2 Air outlet Connection Extension 15 1 Air outlet Connector 30 1 Suction panel Ref Qty Installation Components 7.2.
INSTALLING THE COOKER HOOD electrolux Clearance Height The cooker hood is designed to be fitted over a cooking appliance at the clearance heights stated, providing the maximum output of the appliance beneath does not exceed the maximums quoted in the Technical Specifications. If the output of the appliance below the cooker hood exceeds the maximum outputs quoted, please refer to the cooker manufacturer’s installation instructions.
electrolux INSTALLING THE COOKER HOOD Fitting the Wall Brackets Note: If the hood is to be installed onto a hollow construction or plaster or partition board wall then special fixing screws will be required (not supplied). 7.2.1 132,5 132,5 X 1÷2 Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in EN which the hood will be installed. • Draw a horizontal line at 650 mm above the hob. • Place bracket 7.2.
INSTALLING THE COOKER HOOD electrolux 23 Fitting the Hood Body • Before starting to fix the hood body, tighten the two screws Vr located on the top of the hood body. • Hook the hood body onto the two 4.2x44.4mm screws item 12a. • Fully tighten the screws item 12a. • Using a screw driver and spirit level, adjust the screws item Vr until the hood body is level. Extraction The cooker hood is more effective when used in the extraction mode (ducted to the outside).
electrolux INSTALLING THE COOKER HOOD Recirculation The cooker hood is supplied specified for use in the recirculation mode, with the charcoal filter fitted. EN In the recirculation mode contaminated air is passed through the charcoal filter to be purified and recirculated into the kitchen through the grille outlets on either side of the chimney. • Fix the flange 10 to the lower opening of the connection 15.
INSTALLING THE COOKER HOOD electrolux Extraction The charcoal filter is not required in this mode and should be removed. Ducting The ducting used must be Ø150mm (6ins), or Ø125mm (5ins) in diameter. If possible duct through the wall immediately above the hood body. For the best performance use the shortest possible duct run and the minimum number of bends. Where flexible ducting is fitted it should not be turned through very tight bends as this may impair the performance of the hood.
electrolux INSTALLING THE COOKER HOOD Electrical Connection and Working Test Before fitting the chimney to the canopy make the electrical connection as described in the section titled EN “ELECTRICAL CONNECTION”. When the electrical connection has been made, test the speed fan and worktop illumination. Fitting the Chimney Stack The chimney consists of two sections. The lower chimney measures 740mm and the upper chimney (with the recirculation grilles on either side) measures 465mm.
www.electrolux.