User manual

MAINTENANCE

REMOTE CONTROL (OPTIONAL)

The appliance can be controlled using a remote control

standard LR03-AAA type.

• Do not place the remote control near to heat sources.

• Used batteries must be disposed of in the proper

manner.

Grease filters

CLEANING METAL SELF- SUPPORTING GREASE FIL-

TERS

Alarm signal reset

• Switch off the lights and extractor motor.

• Press button T3 for at least 3 seconds, until the leds

start to flash.

Cleaning the filters

• The filters are washable and must be cleaned when

the LED S1 lights up or at least every 2 months of

operation, or more frequently for particularly heavy

usage.

• Remove the filters one at a time by pushing them to-

wards the back of the group and pulling down at the

same time.

• Wash the filters, taking care not to bend them. Allow

them to dry before refitting.

• When refitting the filters, make sure that the handle

is visible on the outside.