User manual

ManualsBrandsElectrolux ManualsDomestic AppliancesEFC9690X

electrolux electrolux

electrolux control panel

1111

Reset and configuration of theReset and configuration of the

Reset and configuration of the

filters saturation signalfilters saturation signal

filters saturation signal

Switch the hood on at any speed (see

paragraph above “Selection of the

suction speed (power)”

Reset anti-fat filter saturationReset anti-fat filter saturation

Reset anti-fat filter saturation

signalsignal

signal

(GREEN LED FLASHING on the(GREEN LED FLASHING on the

(GREEN LED FLASHING on the

contrcontr

contr

ol level)ol level)

ol level)

First prFirst pr

First pr

oceed with the maintenance ofoceed with the maintenance of

oceed with the maintenance of

the filter as described in thethe filter as described in the

the filter as described in the

corrcorr

corr

esponding paragraph.esponding paragraph.

esponding paragraph.

Touch in a prolonged manner (more

than 3 seconds) the UPPER PART of

the control lever, the LED stops flashing

to indicate that the reset of the signal

has been carried out and the hood

switches off.

Reset anti-fat filter saturationReset anti-fat filter saturation

Reset anti-fat filter saturation

signal ORANGE (amber) LEDsignal ORANGE (amber) LED

signal ORANGE (amber) LED

FLASHINGFLASHING

FLASHING

First prFirst pr

First pr

oceed with the maintenance ofoceed with the maintenance of

oceed with the maintenance of

the filter as described in thethe filter as described in the

the filter as described in the

corrcorr

corr

esponding paragraph.esponding paragraph.

esponding paragraph.

Touch in a prolonged manner (more

than 3 seconds) the UPPER PART of

the control lever, the LED stops flashing

to indicate that the reset of the signal

has been carried out and the hood

switches off.

Deactivating the carbon filterDeactivating the carbon filter

Deactivating the carbon filter

saturation signal (for specialsaturation signal (for special

saturation signal (for special

applications)applications)

applications)

Switch the hood off (see paragraph

above “Select the suction speed

power”)

Touch in a prolonged manner (more

than 5 seconds) the UPPER PART of

the control lever, the LED flashes in

GREEN (amber) to indicate that the

carbon filter saturation signal has been

deactivated.

To reactivate the carbon filter saturation

signal, repeat the operation. The LED

flashes in ORANGE.

• Should the hood or the controls fail to

operate: disconnect the power

supply for at least 5 seconds. After

reconnecting the power supply wait

15 seconds and then check that the

cooker hood is now operating

correctly.