Installation Guide

9
Installation Instructions
Direct Drain Kit (on some models)
Direct Drain Kit continued on next page...
If your model included a direct drain kit, you may follow the
instructions below to install it on your dryer for convenient
drainage of your dryer’s condensed water.
1 Locate the red tubing and plastic fitting on the back of
the dryer.
2 With a pair of pliers, release the hose clamp and
remove the tubing from the plastic fitting.
3 Retrieve the 90 degree plastic elbow from the direct
drain installation kit that came with your dryer and install
it onto the red tubing.
4 Retrieve the clear tubing that came in the kit and install
it also onto the elbow.
5 With the plastic cable tie that came with the kit, secure
the elbow and tubes to the plastic fitting.