Quick Start Guide

A Quick Guide to Getting Started
FAQs
• What can I do to optimize the drying performance?
After ensuring your lint filter is clean, check the cycle and settings
selected are the right ones for your load type. Avoid overloading your
dryer as items need room to tumble freely.
• Is it normal for my dryer to make sounds or noises?
Some sounds are part of your dryer’s normal operations. You may
hear the suspension rollers or exhaust system moving air through
the cycle. For gas models: You may hear a clicking sound as the
gas valve opens and closes to control the gas flow. Check your
Use & Care Manual to learn more.
• How do I add a forgotten item to the load?
To add an item to the dryer, press start/pause, add the item, close the door and press start/pause again
to resume the cycle.
Before you begin
• Check that your dryer is level and that all corners sit solidly on
the floor where it is located. Check that all shipping materials are
removed.
• For gas models, ensure the gas supply valve is open to allow gas
to flow. Refer to the installation instructions section of your Use &
Care Manual for all important information regarding your dryer.
• Clean the lint filter after every load.
Lint build-up on the filter can restrict
air flow, which causes longer drying
times.
• A waxy build-up from fabric softener
sheets may form on the lint filter or
moisture sensing bars. Clean the
filter with warm, soapy water, and
dry thoroughly before replacing.
A20087301
(January 2021)
Care and cleaning
Important Reminder:
Regularly check and clean the
entire outdoor exhaust and venting
system.
See electroluxappliances.com for more FAQs
Cycle settings and options will be
remembered and recalled each time until
changed (except sanitize and Perfect
Steam™).