User manual

Description of the Appliance
 The hood is supplied as an extractor unit and
can also be used with a filtering function by
fitting one charcoal filter.
 You will need an original charcoal filter for this
function (Available from your local Service
Force Centre).
ONLY for: EFT 630 W/GB / 942 120 776
EFT 630 B/GB / 942 120 777
EFT 635 X/GB / 942 120 779
EFT 9460 - EFT 6460
 The cooker hood is supplied ready for use
as a recirculation hood and may be used for
extraction by removing the charcoal filter
which has been fitted inside the cooker
hood.
Extractor version
 In this version fumes are extracted to the
outside via a hose connected to the coupling
ring.
Attention: The hose is not supplied and must
be purchased separately.
 In order to obtain the best performance the hose
should have a diameter equal to the outlet hole.
Recirculation Version
 The air is filtered through a charcoal filter and
returned to the kitchen through the front grid.
 Move the lever to position F.
 You will need an original charcoal filter for this
function (Available from your local Service
Force Centre).
Fig. 1 - Extractor version
Fig. 2 - Recirculation version
To the outside
Hose
Coupling ring
(Bayonet and screw
fitting)
A
F
Charcoal Filter
Lever
Front grid