User manual

7.1 What to do if...
Problem Possible cause Remedy
There is no spark when
you try to activate the
spark generator.
The hob is not connected
to an electrical supply or it
is connected incorrectly.
Check if the hob is correct‐
ly connected to the electri‐
cal supply.
The fuse is released. Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse releases
again and again, contact a
qualified electrician.
Burner cap and crown are
placed incorrectly.
Place the burner cap and
crown correctly.
The flame extinguishes im‐
mediately after ignition.
Thermocouple is not heat‐
ed up sufficiently.
After lightning the flame,
keep the knob pushed for
equal or less than 10 sec‐
onds.
The flame ring is uneven. Burner crown is blocked
with food residues.
Make sure that the injector
is not blocked and the
burner crown is clean.
7.2 Ақаулықты түзету шешімін
өзіңіз таба алмасаңыз...
Ақаулықты түзету шешімін өзіңіз таба
алмасаңыз, дилеріңізге не уәкілетті
қызмет көрсету орталығына
хабарласыңыз. Техникалық ақпарат
тақтайшасындағы деректерді беріңіз.
Пештің дұрыс қолданылғанына көз
жеткізіңіз. Бұлай істемеген жағдайда,
қызмет көрсету орталығының технигі
немесе дилер көрсеткен қызмет,
кепілдік мерзімі кезінде де ақылы
болуы мүмкін. Қызмет көрсету
орталығына қатысты нұсқаулар мен
кепілдік шарттары кепілдік
кітапшасында берілген.
www.electrolux.com12