EGT7828CK EGT7838CK EGT9229CK EGT9239CK EGT9239CKB EN Gas Cooktop User Manual
Contents 2 Safety instructions ................................................................ 3 Parts identification ................................................................ 4 Installation instructions .......................................................... 6 Installation procedure ............................................................... 6 Gas connection ........................................................................ 7 Operation .................................................
Safety instructions Safety instructions Do not use gas other than that which is specified on the label attached. Do not place anything, e.g. flame tamer, asbestos mat, between pan and pan support as serious damage to the appliance may result. (Fig 1) WARNING:• In the event of the burner flames being accidentally extinguished, turn off the burner control knob and do not attempt to re-ignite the burner for at least 1 minute.
Parts identification 4
parts identification The Class of the appliance: Class 3 These instructions are only valid if the country symbol appears on the appliance. If the symbol does not appear on the appliance, it is necessary to refer to the technical instructions which will provide the necessary instructions concerning modification of the appliance to the conditions of use of the country.
installation instructions 6 Installation instructions • Have the installer show you the location of the gas shut off valve and how to shut it off in emergency. • Be certain all packing materials are removed from the hob before operating to prevent fire or smoke damage that could be caused by the presence of these materials. • Observe all instructions for minimum clearance to any combustible surfaces. These should be in accordance with information on the rating plate and with national fire laws.
installation instructions Installation procedure • Before installing the appliance, check that the location provides the required clearances from combustible materials and check if necessary to provide protection to adjacent surfaces as required by the regulation. Make provision for the gas supply to be connected to the location. • Cut the opening in the bench top by the cardboard template given in the hob packing or to the dimensions shown in Fig 7. • Remove the hob from the carton.
operation 8 Ignition burners Choice of burner 1. Check to make sure that the gas supply is accessible and set up with the necessary and appropriate fittings/connectors. • A semi-rapid burner is for special low heat, simmering and slow cooking. • A wok burner is for very fast heating using a wok or large 2. Turn all control knobs to off position. 3. This device is fitted with a safety tap to control the gas flow.
maintenance and care Glass top •If necessary, use a matchstick or brush tocar ports. •Persistent stains may require vigorous rubbing with nylon scourer or creamed powder cleansers. Household enamel cleaners are available, follow the manufacturer instructions in their use. Harsh abrasive cleaners, powder cleaners, steel wool or wax polishes should not be used. •Do not use the glass top as a work table. Burner caps & crowns •These can all be lifted off and removed for separate cleaning.
warranty conditions 10 Technical specifications LPG Triple ring burner 4.8kW Semi rapid burner 1.65kW Reduce Rate Setting Gas connection 1.0kW 30mbar 0.5 Inch straight thread (14 threads per inch) Battery 1.5V D.