User manual

22 electrolux operating the appliance
Safety cut-out
Cooking surface
• If after switching on the cooking sur-
face, a heat setting is not set for a
cooking zone within approx. 10 sec-
onds, the cooking surface automati-
cally switches itself off.
• If one or more sensor fields are cov-
ered for longer than approx. 10 sec-
onds, e.g. by a pan placed upon it, a
signal sounds and the cooking sur-
face switches off automatically.
• If all cooking zones are switched off,
the cooking surface automatically
switches itself off after approx.
10 seconds.
Control panel
• When the appliance is switched off, if
one or more of the sensor fields on
the control panel are covered for
more that 10 seconds, an acoustic
signal sounds. The acoustic signal
switches itself off automatically when
the sensor fields are no longer cov-
ered.
Induction cooking zones
• In the event of overheating (e.g.
when a pan boils dry) the cooking
zone automatically switches itself off.
is displayed. Before being used
again, the cooking zone must be set
to 0 and allowed to cool down.
• If cookware that is not suitable is
used, flashes in the display and af-
ter 2 minutes the display for the
cooking zone switches itself off.
All cooking zones
• If one of the cooking zones is not
switched off after a certain time, or if
the heat setting is not modified, the
relevant cooking zone switches off
automatically. is displayed. Before
being used again, the cooking zone
must be set to 0.
Heat setting Switches off after
v, 1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours