User manual

what to do if … electrolux 31
If you are unable to remedy the
problem by following the above
suggestions, please contact your
dealer or the Customer Care De-
partment.
Warning! Repairs to the appliance
are only to be carried out by quali-
fied service engineers. Considera-
ble danger to the user may result
from improper repairs.
If the appliance has been wrongly
operated, the visit from the custom-
er service technician or dealer may
not take place free of charge, even
during the warranty period.
flashes Unsuitable cookware Use suitable cookware
No cookware on the cooking
zone
Place cookware on the cook-
ing zone
The diameter of the bottom of
the cookware is too small for
the cooking zone
Move onto a smaller cooking
zone
Use suitable cookware
is lit Overheating protection for the
cooking zone has been trig-
gered
Switch off the cooking zone.
Switch the cooking zone on
again
Safety cut-out has been trig-
gered
Switch off the cooking zone.
Switch the cooking zone on
again
and number are displayed Electronics fault Disconnect the appliance from
the electrical supply for a few
minutes (Take the fuse out of
the house’s wiring system)
If after switching on again,
is displayed again, call the
customer service department
and minus are displayed Light rays that are too strong
on the control panel, for exam-
ple bright sunlight
Briefly shade the control panel,
for example with the hand
Acoustic signal sounds, appli-
ance switches itself off Switch
appliance on (again)
Problem Possible cause Remedy