User manual

Problem Possible cause Remedy
An acoustic signal sounds and
the appliance deactivates.
An acoustic signal sounds
when the appliance is deactiva-
ted.
You put something on one or
more sensor fields.
Remove the object from the
sensor fields.
The appliance deactivates. You put something on the sen-
sor field
.
Remove object from the sensor
field.
The residual heat indicator
does not comes on.
The cooking zone is not hot
because it operated only for a
short time.
If the cooking zone operated
sufficiently long to be hot,
speak to the service centre.
The Automatic Heat Up func-
tion does not operate.
The cooking zone is hot. Let the cooking zone become
sufficiently cool.
The highest heat setting is set. The highest heat setting has
the same power as the Auto-
matic Heat Up function.
You decreased the heat setting
from
.
Start from and only increase
the heat setting.
You cannot activate outer ring. Activate the inner ring first.
The sensor fields become hot. The cookware is too large or
you put it too near to the con-
trols.
Put large cookware on the rear
cooking zones if it is necessary.
comes on.
The Automatic Switch Off oper-
ates.
Deactivate the appliance and
activate it again.
comes on.
The Child Safety Device or the
Lock function operates.
Refer to the chapter “Daily
Use”.
comes on.
No cookware is on the cooking
zone.
Put cookware on the cooking
zone.
The cookware is incorrect. Use the correct cookware.
The diameter of the bottom of
the cookware is too small for
the cooking zone.
Move cookware to a smaller
cooking zone.
and number comes on.
There is an error in the appli-
ance.
Disconnect the appliance from
the electrical supply for some
time. Disconnect the fuse from
the electrical system of the
house. Connect it again. If
comes on again, speak to the
service centre.
electrolux 11