User manual

Sensor field Function
10
/
To increase or decrease the time.
11
To activates and deactivates the STOP+GO func-
tion.
HEAT SETTING DISPLAYS
Display Description
The cooking zone is deactivated.
-
The cooking zone operates.
The Keep Warm/STOP+GO function operates.
The Automatic Heat-up function operates.
The cookware is incorrect or too small, or there is no cookware on the
cooking zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Lock / The Child Safety Device operates.
The Power function operates.
The Automatic Switch-Off operates.
RESIDUAL HEAT INDICATOR
Warning! The risk of burns from
residual heat!
The induction cooking zones make the heat
necessary for cooking directly in the bottom
of the cookware. The glass ceramic is hot
from the heat of the cookware.
DAILY USE
ACTIVATION AND DEACTIVATION
Touch
for 1 second to activate or deac-
tivate the appliance.
AUTOMATIC SWITCH OFF
The function deactivates the appliance
automatically if:
All cooking zones are deactivated (
).
You do not set the heat setting after you
activate the appliance.
You spill something or put something on
the control panel for more than 10 sec-
onds, (a pan, a cloth, etc.). An acoustic
signal sounds some time and the appli-
ance deactivates. Remove the object or
clean the control panel.
The appliance becomes too hot (e.g.
when, a saucepan boils dry). Before you
use the appliance again, the cooking
zone must be cool.
You use incorrect cookware. The symbol
comes on and the cooking zone de-
activates automatically after 2 minutes.
You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deacti-
vates. See below.
The relation between heat setting and
times of the Automatic Switch Off func-
tion:
, - — 6 hours
- — 5 hours
— 4 hours
- — 1.5 hours
THE HEAT SETTING
Touch
to increase the heat setting.
Touch
to decrease the heat setting. The
display shows the heat setting. Touch
and at the same time to deactivate the
cooking zone.
6 electrolux