User manual

electrolux 11
Power Management
The cooking zones of the cooking surface
have a maximum power.
The maximum power is reached when the
heat setting 9 has been set for all cooking
zones.
Two cooking zones generate a pair (see fig-
ure) and therefore, the power management
shares the maximum available power be-
tween these cooking zones.
When the power function is selected for one
cooking zone, the power management
makes the additional power for this cooking
zone available by reducing the power of the
corresponding other cooking zone.
Example: the heat setting 9 is selected on
one cooking zone. The power function is
switched on for the corresponding cooking
zone. The power function is carried out but
the heat setting 9 of one of the cooking
zones and the power function for the other
cooking zone of the pair exceed the maxi-
mum power for both at the same time. For
this purpose, the power management reduc-
es the power of the cooking zone that
switched on first from 9 to example 5 and the
display of this cooking zone changes be-
tween 9 and 5 and then stays at the current
possible maximum 5. (If the display changes
between 9 and 5 or 9 and 3 or another value
depends on the type of appliance and the
size of the cooking zone.).
Using the timer
3 If just one countdown value is set you
can change it only when the appliance is
switched on.
3 If a heat setting is set on this cooking
zone in addition to a countdown timer,
the cooking zone is switched off after
the time set has elapsed.
3 If a cooking zone is switched off, the
timer function set is also switched off.
Function Condition Outcome after the time
has elapsed
Automatic cut-out a heat setting is set acoustic signal
00 flashes
Cooking zone switches off
Countdown timer cooking zones not in use acoustic signal
00 flashes