user manual Ceramic glass induction hob EHD80170P
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS 2 3 5 6 Helpful hints and tips 8 Care and cleaning 10 What to do if… 10 Environment concerns 11 Subject to change without notice For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance.
electrolux 3 How to prevent a damage to the appliance • If the objects or cookware fall on the glass ceramic, the surface can be damaged. • Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if you move them on the surface. • Do not let cookware boil dry to prevent the damage to cookware and glass ceramics. • Do not use the cooking zones with empty cookware or without cookware. • Do not cover the parts of the appliance with aluminium foil.
electrolux fuses removed from the holder), earth leakage trips and contactors. Assembly min. 500 mm min. 50 mm min. 50 mm min. 5 mm R 5mm = 600mm 490+1mm 750+1mm = min. 20 mm min. 25 mm min. 5 mm If you use a protection box (additional accessory), the front ventilation space of 5 mm and protective floor directly below the appliance are not necessary. min. 38 mm min.
electrolux 5 PRODUCT DESCRIPTION Cooking surface layout 1 2 180 1 Induction cooking zone 1800W, with the Power function 2800W 2 Induction cooking zone 2400W, with the Power function 3700W 3 Control panel 4 Induction cooking zone 1400 W, with Power function 2500W 5 Induction cooking zone 1800W, with the Power function 2800W 300 mm mm 180 145 5 4 mm mm 3 Control panel layout 1 3 2 12 4 5 6 11 10 9 7 8 Use the sensor fields to operate the appliance.
electrolux sensor field 10 function increases or decreases the time / 11 selects the cooking zone 12 starts and stops STOP+GO The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is heated by the residual heat of the cookware. +number in the timer display shows that there is a malfunction. Residual heat indicator Warning! Risk of burns from residual heat! OPERATING INSTRUCTIONS • the hob gets too hot (e.g.
electrolux 7 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 Switching the Power function on and off The Power function makes more power available to the induction cooking zones. The Power function is activated for 10 minutes at most. After that the induction cooking zone automatically switches back to the highest heat setting (9). To switch on, touch , the indicator above comes on. To switch off, touch a heat setting (1-9).
electrolux the cooking zone flashes faster. Display shows the elapsed time. • Stopping the CountUp Timer: select the cooking zone with and touch or to switch off the timer. The indicator of the cooking zone goes out. Minute Minder You can use the timer as a Minute Minder while cooking zones do not operate. Touch . Touch or of the timer to select the time. When the time elapses, the sound operates and 00 flashes.
electrolux 9 Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, a multi-layer bottom (marked as correct by a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain. Cookware is correct for an induction hob if … • ... some water boils very quickly on a zone set to the highest heat setting.. • ... a magnet pulls on to the bottom of the cookware. The bottom of the cookware must be as thick and flat as possible.
electrolux The Power function is suitable for heating large quantities of water. Information on acrylamides Important! According to the newest scientific knowledge, if you brown food (specially the one which contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at the lowest temperatures and do not brown food too much. CARE AND CLEANING Clean the appliance after each use. Always use cookware with clean bottom.
electrolux 11 Problem Possible cause and remedy comes on • No cookware on the cooking zone. Put cookware on the cooking zone. • Not correct cookware. Use the correct cookware. • The diameter of the bottom of the cookware is too small for the cooking zone. Move cookware to a smaller cooking zone. • The automatic switch-off operates. Stop the appliance and start it again. • Overheating protection for the cooking zone operates. Switch off the cooking zone. Switch on the cooking zone again.
www.electrolux.