User manual

sensor field function
10
/
increases or decreases the time
11
selects the cooking zone
12
starts and stops STOP+GO
+number in the timer display shows
that there is a malfunction.
Residual heat indicator
Warning! Risk of burns from
residual heat!
The induction cooking zones make the heat
necessary for cooking directly in the bottom
of the cookware. The glass ceramic is heat-
ed by the residual heat of the cookware.
OPERATING INSTRUCTIONS
On and Off
Touch
for 1 second to start or stop the
appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off.
• you do not set the heat setting after you
start the hob.
• you cover a sensor field with an object (a
pan, a cloth, etc.) for longer than 10 sec-
onds. The sound operates until you re-
move the object.
• the hob gets too hot (e.g. when a sauce-
pan boils dry). Before you use the hob
again, the cooking zone must be cool.
•
you use incorrect cookware.
comes
on and after 2 minutes the cooking zone
stops automatically.
• you do not stop a cooking zone or
change the heat setting. After some time
comes on and the hob stops. See the
table.
Automatic Switch Off times
Heat setting
1-2 3-4 5 6-9
Stops after 6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch the control bar at the heat setting.
The heat setting indicators come on.
The automatic heat up
The Automatic heat up function sets the
highest heat setting for some time, and
then decreases to the necessary level.
Touch . The indicator flashes. Set the
heat setting (1-8). The indicator of the heat
setting comes on. The indicator above
comes on and after some time goes out.
The time of the automatic heat up changes
for different heat settings.
6 electrolux