user manual Ceramic glass induction hob EHD90341P
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Safety information Installation Description of the appliance Operating the appliance 2 3 5 6 Helpful hints and tips Care and cleaning What to do if... Environment concerns 9 10 10 11 Subject to change without notice Safety information For your safety and correct operation of the appliance, read this manual carefully before installation and use.
electrolux 3 • Do not cover the parts of the appliance with aluminium foil. • Do not cover the ventilation space of 5 mm between the worktop and front of the unit below it. Warning! If there is a crack on the surface, disconnect power supply to prevent the electric shock. Installation Before the installation , note down this data from the rating plate: • Model description (Modell)................ • Product number (Prod. Nr.) ............. .... • Serial number (Ser. Nr.) ...............
electrolux When you have cut it to length (add some mm), push the two ends together. Assembly min. 500 mm min. 50 mm min. 50 mm min. 5 mm R 5mm min. 55mm 380+1mm 880+1mm min. 55mm min. 20 mm min. 25 mm min.
electrolux 5 min. 38 mm min. 5 mm Description of the appliance Cooking surface layout 1 2 3 180 mm 180 mm 210 mm 4 1 Induction cooking zone 2300W, with the Power function 3200W 2 Induction cooking zone 1800W, with the Power function 2800W 3 Induction cooking zone 1800W, with the Power function 2800W 4 Induction cooking zone 2300W, with the Power function 3200W 5 Control panel 210 mm 5 Control panel layout 1 3 2 12 4 5 6 11 10 9 7 8 Use the sensor fields to operate the appliance.
electrolux sensor field function 4 cooking zones' indicators of timer shows for which zone you set the time 5 the timer display shows the time in minutes 6 a heat setting indicators show the heat setting 7 pan detection and automatic switch-off indicator shows that: • there is no cookware on the cooking zone • the cookware is not correct • automatic switch off is active 8 shows that cooking zone stays hot residual heat indicator 9 a control bar 10 to set the heat setting increases or d
electrolux 7 indicator above comes on. To switch off, touch a heat setting (1-9). The heat setting Power management Touch the control bar at the necessary heat setting. The heat setting indicators come on. The automatic heat up The Automatic heat up function sets the highest heat setting for some time, and then decreases to the necessary level. . The indicator flashes. Set the heat Touch setting (1-8). The indicator of the heat setting comes on. The indicator above comes on and after some time goes out.
electrolux • Stopping the timer: select the cooking . Touch . The remaining zone with time counts backwards to 00 . The indicator of the cooking zone goes out. To switch off You can also touch and at the same time. When the time elapses, the sound operates and 00 flashes. The cooking zone switches off. • Stopping the sound: touch CountUp Timer (Count up timer) Use the CountUp Timer to monitor how long the cooking zone operates.
electrolux 9 Touch for 3 seconds. The displays come on and go out. Touch for 3 seconds. comes on, because the sound is off. Touch , comes on, the appliance is in standard mode. The sound is on. Helpful hints and tips Cookware for induction cooking zones Important! In induction cooking a powerful electromagnetic field generates an almost instant heat inside the cookware.
electrolux Heat setting Use to: Time 20-60 min Hints 4-5 Steam potatoes 4-5 Cook larger quantities of food, stews and 60-150 soups min Up to 3 l liquid plus ingredients 6-7 Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts as required Turn halfway through 7-8 Heavy fry, hash browns, loin steaks, steaks 5-15 min Turn halfway through 9 Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep fry chips The
electrolux 11 Problem Possible cause and remedy The residual heat indicator does not come on. The cooking zone is not hot because it operated only for a short time. If the cooking zone is supposed to be hot, speak to the After Sales Service. A sound operates and appliance starts and stops again. After 5 seconds one more sound operates. You covered Heat setting alternates The Power management is active. See the section Power management. . Uncover the sensor field.
electrolux your household waste disposal service or the shop where you purchased the product. Packaging material The packaging materials are friendly to the environment and can be recycled. The plastic components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as household waste at the waste disposal facilities in your municipality.
electrolux 13
electrolux
electrolux 15
www.electrolux.com www.electrolux.
