User manual

sensor field function
4
cooking zones' indicators of timer shows for which zone you set the time
5
the timer display shows the time in minutes
6
a heat setting indicators show the heat setting
7
pan detection and automatic
switch-off indicator
shows that:
• there is no cookware on the cooking zone
• the cookware is not correct
• automatic switch off is active
8
residual heat indicator
shows that cooking zone stays hot
9
a control bar to set the heat setting
10
/
increases or decreases the time
11
selects the cooking zone
12
with an indicator
starts and stops STOP+GO
+number in the timer display shows
that there is a malfunction.
Residual heat indicator
Warning! Risk of burns from
residual heat!
The induction cooking zones make the heat
necessary for cooking directly in the bottom
of the cookware. The glass ceramic is slightly
heated by the residual heat of the cookware.
Operating the appliance
On and Off
Touch
for 1 second to start or stop the
appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off.
• you do not set the heat setting after you
start the hob.
• you cover a sensor field with an object (a
pan, a cloth, etc.) for longer than 10 sec-
onds. The sound operates until you re-
move the object.
• the hob gets too hot (e.g. when a sauce-
pan boils dry). Before you use the hob
again, the cooking zone must be cool.
•
you use incorrect cookware.
comes on
and after 2 minutes the cooking zone
stops automatically.
• you do not stop a cooking zone or change
the heat setting. After some time
comes
on and the hob stops. See the table.
Automatic Switch Off times
Heat setting 1-2 3-4 5 6-9
Stops after
6 hours 5 hours 4 hours 1.5 hours
6 electrolux