User Manual

The electronic display panel consists of an LCD display with
white backlighting and 6 touch buttons. When the power is
first turned on, the display, with backlighting, will activate.
If no buttons have been pressed and the fridge door is
closed the backlighting will turn off after 30 seconds.
Controllingthetemperature
We recommend that when you start your refrigerator for
the first time, the temperature for the refrigerator is set to
3°C and the freezer to -18°C. If you want to change the
temperature, follow the instructions below. Make only
small adjustments and wait 24 hours to see if it’s correct.
Checking the softness of ice cream is a good indication
if your freezer is the right temperature, while feeling the
coldness of water kept in the refrigerator is a good way
of checking the temperature of the food compartment.
NOTE:
When you set a temperature, you set an average
temperature for the whole refrigerator cabinet.
Temperatures inside each compartment may vary,
depending on how much food you store and where you
place it. High or low room temperature may also affect the
actual temperature inside the refrigerator.
If no button has been pressed for some time there may be
a delay of up to 2 seconds before the display responds,
this is normal and is a part of the display design to reduce
the chance of accidental changes.
Changingthefreezertemperature
Pressthefreezerbuttontomakethefreezercolderin1°C
steps. Once the maximum of -23°C is reached, the display
will return to -14°C with the next press of the button. The
bar graph gets smaller with colder freezer settings.
Changingtherefrigeratortemperature
Pressthefridgebuttontomaketherefrigeratorcolderin
1°C steps. Once 0°C is reached, the display will return to
7°C with the next button press. The bar graph gets smaller
with colder refrigerator settings.
Fastfreezefunction
Use the fast freeze function when you add a large amount
of food to the freezer compartment. This freezes the
food quickly but does not affect the temperature in the
refrigerator compartment.
To use this function, press the fast freeze button once.
An animated icon will light up. The fast freeze function will
now operate for 90 minutes. If you want to turn the fast
freeze function off before 90 minutes have passed, simply
press the fast freeze button again. The icon will disappear
and the freezer will return to normal operation.
Freezertemperaturealarm
If the alarm sounds for no apparent reason, check whether
anything is keeping the door open. If the freezer becomes
too warm due to the freezer door being left open or warm
food being placed too close to the temperature sensor,
a buzzer will sound.
The icon adjacent to the alarm reset button, the freezer set
temperature and bar graph will all flash, until the alarm reset
button is pressed. Once pressed, the alarm disable icon
adjacent to the alarm button will illuminate for 50 minutes,
or until the temperature drops to an acceptable level.
Make sure nothing is holding the freezer door open and
move any warm food away from the temperature sensor.
If the freezer is still too warm after 50 minutes, the alarm
will sound again, indicating that something may be wrong
with the refrigerator.
NOTE:
The freezer temperature alarm can be reset for 12 hours by
pressing the alarm reset button continuously for 10 seconds.
Door alarm
If the fridge door is left open for more than two minutes,
the alarm will buzz and an arrow pointing to an open door
will flash, along with the temperature setting and bar graph.
If you want to leave the door open while you load the
refrigerator, you can turn the alarm off for 8 minutes by
pressing the alarm reset button.
Electronic display controls
electrolux refrigeration electronic controls 7
EMAN_Trio_Oct10.indd 7 5/10/10 3:47:09 PM