User manual

Step Control panel Display
4. Touch in order to set the desired cooking setting
Until
/ after 3
seconds
If during the automatic warm up a
higher heat setting is selected, e.g. from
to , the automatic warm up is ad-
justed.
The length of time that the automatic warm
up function operates depends on the heat
setting selected.
Heat setting Length of the automatic warm up [min:sec]
0:10
0:10
0:10
3:10
5:50
10:10
2:00
2:30
2:50
---
Locking/unlocking the control panel
The control panel, with the exception of the
“On/Off” sensor field, can be locked at any
time in order to prevent the settings being
changed e.g. by wiping over the panel with a
cloth.
Control panel Display
Switch on
Touch
(for 5 seconds)
Switch off
Touch
previously set heat setting
When you switch the appliance off, the
locking function is automatically switch-
ed off.
Using the child safety device
The child safety device prevents unintention-
al use of the appliance.
Switching on the child safety device
Step Control panel Display/Signal
1.
Switch on the appliance. Do not set a heat set-
ting.
2.
Touch for 4 seconds
The child safety device is switched on.
Overriding the child safety device
The child safety device can be switched off
in this way for a single cooking session; it re-
mains activated afterwards.
Step Control panel Pilot light
1.
Switch on the appliance.
2.
Touch for 4 seconds lights up
6 electrolux operating the appliance