User manual

Problem Possible cause Remedy
and a number come on.
There is an error in the
hob.
Disconnect the hob from
the electrical supply for
some time. Disconnect the
fuse from the electrical
system of the house. Con‐
nect it again. If comes
on again, speak to an Au‐
thorised Service Centre.
E6 comes on. The second phase of the
power supply is missing.
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Remove the
fuse, wait one minute, and
insert the fuse again.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The instructions about the
Service Centre and conditions of
guarantee are in the guarantee booklet.
9. TECHNICAL DATA
9.1 Rating plate
Model EHF6232XSK PNC 949 492 253 00
Typ 60 HAD 20 AO 220 - 240 V 50 - 60 Hz
Made in Romania
Ser.Nr. ................. 5.7 kW
ELECTROLUX
9.2 Cooking zones specification
Cooking zone
Nominal Power (Max heat set‐
ting) [W]
Cooking zone diameter [mm]
Left front 1800 180
Left rear 1200 145
Right front 1050 / 1950 / 2700 145 / 210 / 270
For optimal cooking results use
cookware not larger than the diameter of
the cooking zone.
ENGLISH 13