User manual

BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
INITIAL CLEANING
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Clean-
ing".
SETTING THE TIME
You must set the time before you
operate the appliance.
When you connect the appliance to the
electrical supply the indicator for the Time
of Day function flashes.
Press the + or - button to set the correct
time.
After approximately five seconds, the flash-
ing stops and the display shows the time of
day you set.
Useful information:
• To change the time, press the Selection
button again and again until the indicator
for the Time of Day function flashes. You
must not set the Duration
or End
) function at the same time.
• In case of a power cut up to 1 hour, the
time of day is shown and the indicator
for the Time of Day function flashes.
Make sure that the time is correct and
press the Selection button to stop the
flashing.
• In case of a power cut longer than 1
hour, you must set the time again.
DAILY USE
WARNING!
Refer to the Safety chapters.
To use the appliance, press the control
knob. The control knob comes out.
ACTIVATING AND
DEACTIVATING THE
APPLIANCE
1.
Turn the control knob for the oven
functions to select an oven function.
2.
Turn the control knob for the tempera-
ture to select a temperature.
3.
To deactivate the appliance turn the
control knobs for the oven functions
and temperature to off position.
Knob symbol, indicator or lamp
(depends on the model - refer
to the appliance overview):
• The indicator comes on when the oven
heats up.
• The lamp comes on when the appliance
operates.
• The symbol shows whether the knob
controls one of the cooking zones, the
oven functions or the temperature.
OVEN FUNCTIONS
Oven function Application
Light To activate the lamp without a cooking function.
True Fan Cooking To bake on up to 3 oven levels at the same time
and to dry food. Set the oven temperatures 20 -
40 °C lower than when using Conventional Cook-
ing.
6
www.electrolux.com