User manual

• The Fast heat up is not available with
every oven function. An acoustic signal
sounds if the Fast heat up is not availa-
ble for the set function if Faulty tone is
activated in the “Settings menu”.
6.5 Energy saving
The appliance contains fea-
tures which help you save en-
ergy during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-
ate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions (Duration, End, Time delay).
– When the appliance is off, you can
use the heat to keep food warm. The
clock / Residual heat display shows
the remaining temperature, and the
bars show the temperature as it de-
creases.
• Cooking with the lamp off - Touch
to deactivate the lamp during cook-
ing.
7. CLOCK FUNCTIONS
SYM-
BOL
FUNCTION DESCRIPTION
TIME OF DAY To show the time of day. To change the time of day,
refer to 'Setting the time of day'.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates. You can use
Duration and End at the same time (Time delay) if you
want the appliance to activate and deactivate automati-
cally later.
7.1 Count Up Timer
The Count Up Timer starts to count when
the appliance starts to heat.
Reset the Count Up Timer: Touch
and at the same time until the display
shows "00:00" and the Count Up Timer
starts to count up again.
The Count Up Timer is not activa-
ted if Duration and End are set.
7.2 Setting the DURATION
1.
Activate the appliance and set a heat-
ing function and temperature.
2.
Touch again and again until the
display shows
.
flashes in the display.
3.
Touch or to set the minutes
for DURATION.
4.
Touch to confirm.
5.
Touch or to set the hours for
DURATION.
If you touch while you set the
hours for DURATION, the appli-
ance goes to the END function
setting.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the
display. The appliance deactivates.
Touch a sensor field to stop the
acoustic signal.
7.
Deactivate the appliance.
7.3 Setting the END
1.
Activate the appliance and set a heat-
ing function and temperature.
12
www.electrolux.com