User manual

2.
Touch again and again until the
display shows
. flashes in the
display.
3.
Touch or to set END (first you
set the minutes and then the hours)
and
to confirm.
4.
When the set time ends, an acoustic
signal sounds for two minutes.
and the time setting flash in the
display. The appliance deactivates.
5.
Touch a sensor field to stop the
acoustic signal.
6.
Deactivate the appliance.
7.4 Setting the MINUTE
MINDER
Use the MINUTE MINDER to set a count-
down (maximum 2 h 30 min). This func-
tion has no effect on the operation of the
appliance. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
1.
Touch . and "00" flash in the
display.
2.
Use or to set the MINUTE
MINDER. First you set the seconds
and then minutes and hours.
3.
Touch and at the same time
to reset the set time.
4.
Touch or the MINUTE MINDER
starts automatically after five sec-
onds.
5.
When set time ends, an acoustic sig-
nal sounds for two minutes. "00:00"
and
flash in the display.
6.
Touch a sensor field to stop the
acoustic signal.
7.5 Setting the Time delay
function
DURATION and END can be used
at the same time, if the appliance is to be
switched on and off automatically later. In
case first set the DURATION
and then
END
function (refer to "Setting the DU-
RATION" and "Setting the END" ).
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
There are 9 automatic pro-
grammes and recipes. You can
find the recipes for the automatic
programmes in the "Recipe
book".
8.1 Automatic programmes
Setting an automatic programme:
1.
Activate the appliance.
2.
Touch . The display shows symbol
and number of the automatic pro-
gramme.
3.
Touch or to choose the auto-
matic recipes.
4.
Touch or wait five seconds until
the appliance automatically starts to
work.
5.
When set time ends, an acoustic sig-
nal operates for two minutes. Symbol
flashes.
The appliance deactivates.
6.
Touch any sensor field to stop an
acoustic signal.
8.2 Automatic programmes with
weight input
If you set the weight of the meat, the ap-
pliance calculates the roasting time.
1.
Activate the appliance.
2.
Touch .
3.
Touch or to set the weight
programme (refer to "Recipe book" ).
The display shows: cooking time, du-
ration symbol
, a default weight, a
unit of measurement (g).
4.
Touch or the settings save auto-
matically after five seconds.
ENGLISH 13