User manual
Indicator of the setting
menu
Description Value to set
SET5 SERVICE MENU ---
SET6 RESTORE SETTINGS YES / NO
1)
It is not possible to deactivate the tone of the ON / OFF sensor field.
Activate the Settings menu:
1.
When the appliance is deactivated,
touch and hold
for three seconds.
The display shows "SET1" and "1"
flashes.
2.
Touch / to set the setting.
3.
Touch .
4.
Touch / to change the value
of the setting.
5.
Touch .
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates automatically after some time if a
heating function operates and you do not
change any settings.
Oven temperature Switch-off time
30 °C - 115 °C 12.5 h.
120 °C - 195 °C 8.5 h.
200 °C - 245 °C 5.5 h.
250 °C - maximum °C 3.0 h.
After an automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off works
with all oven functions, apart from
Slow Cook, Core temperature
sensor, Duration, End, Time delay.
10.6 Brightness of the display
There are two modes of the display's
brightness:
• Night brightness:
– When the appliance is deactivated,
the brightness of the display is lower
between 22:00 and 06:00.
• Day brightness:
– When the appliance is activated.
– If you touch a sensor field (apart from
ON / OFF) during the night brightness
mode, the display goes back to the
day brightness mode for the next 10
seconds.
– When the appliance is deactivated
and you set the Minute Minder. When
the Minute Minder function ends, the
display goes back to the night bright-
ness mode.
10.7 Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you de-
activate the appliance, the cooling fan can
continue to operate until the appliance
cools down.
11. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a clean-
ing agent.
ENGLISH 17