EHH957BE Cooking User manual
electrolux.com.au CONGRATULATIONS CONTENTS hank you for purchasing an Electrolux cooktop. T You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Safety information.....................................................3 Welcome to Electrolux. Product description......................................
SAFETY INFORMATION lease read the user manual carefully and store in a handy P place for later reference. Pass the user manual on to possible new owners of the appliance. Read the following carefully to avoid damage or injury. NOTE: You must read these warnings carefully before installing or using the appliance. If you need assistance, contact your Customer Care Department.
electrolux.com.au SAFETY INFORMATION WARNING! Risk of damage to the appliance. • T he glass ceramic can be damaged by objects falling onto it. • T he edge of the glass ceramic can be damaged by being knocked by the cookware. • C ookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface. • B efore spillage can become burnt on to the cooking surface, remove it with a damp cloth.
PRODUCT DESCRIPTION Figure 1a Figure 1b 1 3 5 2 4 1 Burner 4 Injector 2 Skirt 5 Ignition spark plug 3 Flame safeguard sensor Burner flame ports Figure 2a 8 9 7 10 1 6 5 2 4 3 1 Dual wok burner 5 Removable cast iron trivet 2 Enamelled burner skirt 6 Induction cooking zone 7 Induction cooking zone 8 Induction cooking zone 9 Induction cooking zone 10 Control panel 3 4 Ceramic Glass hob – the glass hob is resistant to heat, cold and rapid temperature changes, but
electrolux.com.au PRODUCT DESCRIPTION (CONTINUED) 2 1 3 4 5 7 Sensor field 8 6 9 Function 1 To activate and deactivate the appliance 2 To lock / unlock the control panel Sets all operating zones to a keep warm setting 3 To activate the Bridge function 4 To activate and deactivate the manual mode of the Hob2Hood function.
Heat setting displays Display Description The cooking zone is deactivated The cooking zone operates Sets all operating zones to a keep warm setting The automatic heat up function operates Power function operates + digit There is a malfunction OptiHeat Control (3 step Residual heat indicator) : continue cook / stay warm / residual heat Lock / The child safety function operates Not correct cookware or too small or no cookware on the cooking zone The automatic switch off function operates OptiHeat cont
electrolux.com.au OPERATING INSTRUCTIONS Before first use Installation • An authorised person must install this appliance and MUST provide a Certificate of Compliance. This certificate should be retained along with purchase information. • Before using the appliance, ensure that all packing materials are removed from the appliance. • In order to avoid any potential hazard, the installation instructions in this booklet, and any labels on the appliance must be followed.
Note! When the wok burner is turned to low only the smal inner ring stays lit. This is a normal function of the dual wok burner to provide a very low power flame option. Figure 2a In the absence of electrical power, carry out the ignition directly to the burner with a hand held ignition source. Choice of burner For your convenience there is a choice of burners: • A small burner for special low heat and slow cooking.
electrolux.com.au OPERATING INSTRUCTIONS Bridge function On and off Touch for 1 second to activate or deactivate the appliance. Automatic switch off The function deactivates the appliance automatically if: • All cooking zones are deactivated ( • You do not set the heat setting after you activate the appliance. • You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc). An acoustic signal sounds after some time and the appliance deactivates.
Automatic heat up Count down timer Use the Count Down Timer to set how long the cooking zone operates for one cooking session. Set the Count Down Timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer. • To set the cooking zone: touch again and again until the indicator of the required cooking zone comes on. • tarting the Count Down Timer: touch of the S timer to set the time minutes).
electrolux.com.au OPERATING INSTRUCTIONS (CONTINUED) Keep warm Operating the function automatically The function sets all cooking zones that operate to the lowest heat setting ( ). When operates, you cannot change the heat setting. The default automatic mode from the factory is H5. You can change the automatic mode by following the instructions below. When you activate the hob the hood will adjust the fan speed automatically.
SenseFry function This function lets you set a heat setting level to fry your food. The hob keeps the selected temperature automatically while frying. Once the heat setting level is set, no manual temperature adjustment is necessary. You can set the function for the left front cooking zone of the hob. CAUTION! Use laminated pans only with low heat setting level to prevent overheating and damage of the cookware. To activate the function: 1. Put an empty pan on the left front cooking zone.
electrolux.com.au HELPFUL HINTS AND TIPS Operating the fan speed manually Cookware is correct for an induction hob if: You can also operate the function manually. To do when the hob is active. This deactivates that touch automatic operation of the function and allows you to change the fan speed manually. When you press you raise the fan speed by one. When you reach an intensive level and press again you will set fan speed to 0 which deactivates the hood fan.
The noises during operation Hints and Tips for Hob²Hood function If you can hear: When you operate the hob with Hob2Hood function: • c rack noise: cookware is made of different materials (Sandwich construction). • Protect the hood panel from direct sunlight. • w histle sound: you are using one or more cooking zones with high power levels and the cookware is made of different materials (Sandwich construction). • Do not cover the hob panel. • humming: you are using high power levels.
electrolux.com.au HELPFUL HINTS AND TIPS (CONTINUED) Hints and Tips for Sensefry function Examples of cooking applications for the function To achieve the best results with the function: The data in the tables shows examples of food for each heat setting level. The amount, thickness, quality and temperature ( i.e. frozen ) of the food have an influence on the correct heat setting level. Choose the heat setting level and adjustment that are the best for your cooking habits and pans.
Examples of cooking applications The relation between the heat setting and the cooking zone consumption of power is not linear. When you increase the heat setting it is not proportional to the increase of the cooking zone consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power. IMPORTANT The data in the table is for guidance only.
electrolux.com.au CARE AND CLEANING CAUTION! Ensure the appliance is off and cool before cleaning. Enamel (on burner skirts and trivets) Persistent stains may require rubbing with a nylon scourer or creamed powder cleansers. Household enamel cleaners are available, follow the manufacturer’s instructions in their use. Harsh abrasive cleaners, powder cleaners, steel wool or wax polishes should not be used.
scratching this surface during cleaning. In instances of heavy soiling, it may be necessary to apply a non-abrasive cleaning compound and rub with a cloth until the soiling is removed and then finish with a soft, dry cloth. NOTE! DO NOT place trivets or burners in the dishwasher. Ignition spark plug and flame safeguard sensor GENTLY clean the ignition spark plug and flame safeguard sensor with a damp cloth to avoid lighting difficulties. Ensure that they are dry before use.
electrolux.com.au CARE AND CLEANING (CONTINUED) Clean the appliance after each use. Always use cookware with clean bottom. 2. Remove after the appliance is sufficiently cool: limescale rings, water rings, fat, stains, shiny metallic discolourations. Use a special cleaning agent for glass ceramic or stainless steel. IMPORTANT Scratches or dark stains on the glass ceramic have no effect on how the appliance operates. 3. Clean the appliance with a moist cloth and some detergent. 4.
TROUBLESHOOTING TROUBLESHOOTING If you have a problem with the cooktop, check the table below. You may be able to solve the problem and this will save you from paying for a service call. You will have to pay for a service call even in the warranty period if the problem is one listed below. Problem Possible cause Remedy Burner will not light even though the sparker is working Knob not held down long enough in ‘HIGH’ position for flame safeguard.
electrolux.com.au TROUBLESHOOTING (CONTINUED) TROUBLESHOOTING Problem Possible cause Remedy Red rings, limescale or water rings, shiny metallic or other discolouration, scratches/ shadows, bubbles or other miscellaneous marks or stains on ceramic glass cooktop surface. Cooktop surface has not been cleaned Use a ceramic glass cleaner such correctly. Cleaning/ maintenance of the as Cerapol. cooktop surface is not covered under warranty.
The sensor fields become hot. The cookware is too large or you put it too near to the controls. Put large cookware on the rear cooking zones if necessary. There is no signal when you touch the panel sensor fields. The signals are deactivated. Activate the signals (refer to “OffSound control”). comes on The automatic switch-off operates. Deactivate the appliance and activate it again. comes on The Child Safety Device or the Lock function operates.
electrolux.com.au TECHNICAL INFORMATION Model. Voltage (volts) 220-240 Ser.Nr.
INSTALLATION INSTRUCTIONS This appliance must be installed by an authorised person and in compliance with: 1. AS/NZS 5601.1 Gas Installations Part 1: General Installations, and AS/NZS 5601.2 Gas Installations Part 2: LP Gas installations in caravans and boats for non-propulsive purposes, or the relevant installation code for gas appliances in your country. CAUTION! Cooktops are supplied set up for natural gas (NG). To use on LPG, the injectors must be changed using the conversion kit supplied.
electrolux.com.au INSTALLATION PROCEDURE 1. The bench cutout should be made as per cutout dimensions . 2. Adjacent walls, cupboards and protection for combustible materials: Ensure that the appliance is installed in accordance with AS/NZS 5601.1, or AS/NZS 5601.2 with regard to clearances to combustible surfaces and materials, and clearances to rangehoods and exhaust fans. To ensure clearances of 200mm from burners to vertical combustible surfaces observe the minimum distance requirements .
min. 25mm min. 50mm min.8mm min. 25mm min. 60mm *Note: The clearance must meet or exceed the minimum recommended for both the rangehood and cooktop. Refer to the rangehood installation manual.
electrolux.com.au GAS CONNECTION Operation on N.G./S.N.G Elbow positioning This appliance is supplied for use with Natural Gas. However, it can be converted for use with LPG. Refer to LP conversion on page 28. It is possible to reposition the elbow if required by loosening the locking nut and elbow by using two spanners. Re-tighten the entire assembly after the elbow has been repositioned. When fitting elbow to appliance, ensure that the sealing washer is fitted.
OPERATION ON N.G./S.N.G. CHECKING THE GAS SUPPLY Assembly of the regulator The assembly of the regulator to the cooktop manifold is achieved via the elbow union and sealing washer supplied, refer to figure 9. The ½” parallel thread connects to the manifold, and the sealing washer is placed between the manifold end and the flat face on the elbow.
electrolux.com.au LPG CONVERSION CHANT REGULATOR IMPORTANT! Refer to page 28 if you have been supplied with a DONG YANG regulator. This appliance is supplied set up for Natural Gas usage. A conversion kit is included with the product for Universal LPG usage. The conversion kit contains the appropriate injectors and 1 LPG sticker. Please follow the procedure below if a conversion to suit UNIVERSAL LPG is required: 1.
ELECTRICAL CONNECTION (220-240 VOLTS) The appliance is supplied with a standard 7.5 Amp service cord terminated by a 3-pin plug for connection to a standard household socket. The electrical supply is required to power the electronic ignition system. NOTE! It will be necessary for servicing purposes to disconnect the electrical power supply. The power point should therefore be accessible after the appliance is installed, as specified in the local wiring regulations.
electrolux.com.au TESTING APPLIANCE OPERATION After installation, test the appliance and ensure that it operates correctly before handing it over to the customer. The following procedure is recommended: 1. Turn on the gas and electricity supply and attempt ignition on all burners, both separately and in combination. (For correct procedure refer to page 8 Lighting Burners). Note that additional time needs to be allowed for the initial lighting as air has to be purged from the pipes. 2.
NOTES
electrolux.com.
Warranty 35 FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: ELECTROLUX BUILT-IN OVENS, COOKTOPS, FREESTANDING COOKER AND WARMING DRAWER This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This warranty is in addition to other rights you may have under the Australian Consumer Law.
Electrolux Home Products Australia telephone: 1300 363 640 1800 350 067 fax: email: customercare@electrolux.com.au web: electrolux.com.au Electrolux Home Products New Zealand telephone: 0800 436 245 0800 225 088 fax: email: customercare@electrolux.co.nz web: electrolux.co.nz To add a touch of professional inspiration to your home, visit electrolux.com.au or electrolux.co.nz electrolux.com.au or electrolux.co.nz P/No. ANC A22211203 Rev.A © 2021 Electrolux Home Products Pty Ltd.
