EHI3251BE,EHI635BE, EHI977BE Induction hob Installation & User manual
21 Customer Care Center 22
PRODUCT DESCRIPTION EHI3251BE 1 2 3 1 Induction cooking zone 2 Induction cooking zone 3 Control panel
PRODUCT DESCRIPTION EHI635BE 1 3 2 1 Induction cooking zone 2 Induction cooking zone 3 Induction cooking zone 4 Control panel 5 Induction cooking zone 1 Induction cooking zone 2 Induction cooking zone 3 Induction cooking zone 4 Induction cooking zone 5 Control panel 6 Induction cooking zone 4 EHI977BE 1 4 2 5 3 6
Control panel layouts EHI3251BE 1 4 2 3 6 7 Sensor field 9 5 6 8 Function 1 To activate and deactivate the appliance 2 To lock / unlock the control panel Sets all operating zones to a keep warm setting 3 To activate the Bridge function 4 To activate and deactivate the Child lock 5 To set the timer function 6 To increase or decrease the time 7 Control bar To set a heat setting 8 To set the heating zone 9 To activate the Power function
Control panel layouts EHI635BE 1 2 3 5 Sensor field 4 6 7 8 9 10 Function 1 To activate and deactivate the appliance 2 To lock / unlock the control panel Sets all operating zones to a keep warm setting 3 To activate the Bridge function 4 To activate and deactivate the manual mode of the Hob2Hood function.
PRODUCT DESCRIPTION (CONTINUED) Control panel layouts EHI977BE 1 2 3 7 Sensor field 4 5 8 6 9 10 Function 1 To activate and deactivate the appliance 2 To activate the chef function 3 To activate the Sensefry function 4 To increase or decrease the time 5 To set the timer function 6 To activate and deactivate the manual mode of the Hob2Hood function.
Heat setting displays Display Description The cooking zone is deactivated The cooking zone operates Sets all operating zones to a keep warm setting The automatic heat up function operates Power function operates + digit There is a malfunction OptiHeat Control (3 step Residual heat indicator) : continue cook / stay warm / residual heat Lock / The child safety function operates Not correct cookware or too small or no cookware on the cooking zone The automatic switch off function operates OptiHeat cont
OPERATING INSTRUCTIONS On and off Bridge function Touch for 1 second to activate or deactivate the appliance. IMPORTANT! Use the Bridge Function with the Infinite Plancha accessory1). Automatic switch off The function deactivates the appliance automatically if: • All cooking zones are deactivated ( ). • You do not set the heat setting after you activate the appliance. • You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc).
Automatic heat up Count down timer Use the Count Down Timer to set how long the cooking zone operates for one cooking session. Set the Count Down Timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer. • To set the cooking zone: touch again and again until the indicator of the required cooking zone comes on. • Starting the Count Down Timer: touch of the timer to set the time minutes).
OPERATING INSTRUCTIONS (CONTINUED) Keep warm Operating the function automatically The function sets all cooking zones that operate to the lowest heat setting ( ). When operates, you cannot change the heat setting. The default automatic mode from the factory is H5. You can change the automatic mode by following the instructions below. When you activate the hob the hood will adjust the fan speed automatically.
Flexible Induction Cooking Area only applies to EHI977BE WARNING! Refer to Safety chapters. FlexiBridge function The flexible induction cooking area consists of four sections. The sections can be combined into two cooking zones with different size, or into one large cooking area. You choose the combination of the sections by choosing the mode applicable to the size of the cookware you want to use.
OPERATING INSTRUCTIONS (CONTINUED) Power management All cooking zones are connected to one phase. See the illustrations. • The function activates when the total electricity loading of the cooking zones exceeds maximum electricity loading of the phase. • The function divides the power between cooking zones. • The function decreases the power of the other cooking zones. • The heat setting display of the reduced zones alternates between the chosen heat setting and the reduced heat setting.
OPERATING INSTRUCTIONS (CONTINUED) Correct cookware position: Correct cookware position: To use this mode you have to place the cookware on the three connected sections. If you use cookware smaller than two sections the display shows and after 2 minutes the zone switches off. Incorrect cookware position: Incorrect cookware position: FlexiBridge big bridge mode To activate the mode press until you see the correct mode indicator. This mode connects three rear sections into one cooking zone.
Correct cookware position: Powerslide Function To use this mode you have to place the cookware on the four connected sections. If you use cookware smaller than three sections the display shows and after 2 minutes the zone switches off. This function allows you to adjust the temperature by moving the cookware to a different position on the induction cooking area. The function divides the induction cooking area into three areas with different heat settings.
OPERATING INSTRUCTIONS (CONTINUED) • When you activate the function for the first time you will get heat setting for the front position, for the middle position and for the rear position. SenseFry function Only for applies to EHI3251BE & EHI977BE This function lets you set a heat setting level to fry your food. The hob keeps the selected temperature automatically while frying. Once the heat setting level is set, no manual temperature adjustment is necessary. To activate the function: 1.
HELPFUL HINTS AND TIPS Operating the fan speed manually Cookware is correct for an induction hob if: You can also operate the function manually. To do that touch when the hob is active. This deactivates automatic operation of the function and allows you to change the fan speed manually. When you press you raise the fan speed by one. When you reach an intensive level and press again you will set fan speed to 0 which deactivates the hood fan. To start the fan again with fan speed 1 touch .
HELPFUL HINTS AND TIPS (CONTINUED) The noises during operation Hints and Tips for Hob²Hood function If you can hear: When you operate the hob with Hob2Hood function: • crack noise: cookware is made of different materials (Sandwich construction). • Protect the hood panel from direct sunlight. • whistle sound: you are using one or more cooking zones with high power levels and the cookware is made of different materials (Sandwich construction). • Do not cover the hob panel.
Examples of cooking applications The relation between the heat setting and the cooking zone consumption of power is not linear. When you increase the heat setting it is not proportional to the increase of the cooking zone consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power. IMPORTANT The data in the table is for guidance only.
HELPFUL HINTS AND TIPS (CONTINUED) Hints and Tips for Sensefry function Examples of cooking applications for the function To achieve the best results with the function: The data in the tables shows examples of food for each heat setting level. The amount, thickness, quality and temperature ( i.e. frozen ) of the food have an influence on the correct heat setting level. Choose the heat setting level and adjustment that are the best for your cooking habits and pans.
IMPORTANT! Different sizes of pans can cause different heat up times. Heavy pans store more heat than the light pans but take more time to heat up. Correct pans for Fry Assist function Use only pans with flat bottom. To check if the pan is correct: 1. Put your pan upside down. 2. Put a ruler on the bottom of the pan. 3. Try to put a 5 cent coin or something with similar thickness between the ruler and base of the pan a. The pan is incorrect if you can put the coin between the ruler and the pan.
CARE AND CLEANING Remove after the appliance is sufficiently cool: limescale rings, water rings, fat, stains, shiny metallic discolourations. Use a special cleaning agent for glass ceramic or stainless steel. Clean the appliance after each use. Always use cookware with clean bottom. 2. IMPORTANT Scratches or dark stains on the glass ceramic have no effect on how the appliance operates. 3. Clean the appliance with a moist cloth and some detergent. 4.
TROUBLESHOOTING TROUBLESHOOTING Problem Possible cause Remedy Red rings, limescale or water rings, shiny metallic or other discolouration, scratches/ shadows, bubbles or other miscellaneous marks or stains on ceramic glass cooktop surface. Cooktop surface has not been cleaned Use a ceramic glass cleaner such correctly. Cleaning/ maintenance of the as Cerapol. cooktop surface is not covered under warranty. If a service call is placed to clean the cooktop you will be charged for the visit.
TROUBLESHOOTING The sensor fields become hot. The cookware is too large or you put it too near to the controls. Put large cookware on the rear cooking zones if necessary. There is no signal when you touch the panel sensor fields. The signals are deactivated. Activate the signals (refer to “OffSound control”). comes on The automatic switch-off operates. Deactivate the appliance and activate it again. comes on The Child Safety Device or the Lock function operates.
INSTALLATION Built-in appliances WARNING! Only use the built-in appliances after you assemble the appliance into correct built-in units and work surfaces that align to the standards. Refer to “Safety information” chapter. IMPORTANT Connection cable BEFORE INSTALLATION • Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) 3 x 1.
TECHNICAL INFORMATION Model. Voltage (volts) 220-240 Ser.Nr. Cycles (Hz) 50-60 ELECTROLUX EHI635BE Induction 7.4kW Cooking zone Nominal Power Power Function (Max heat setting) (W) activated (W) Power function maximum duration (min) Minimum cookware diameter (mm) Right front 1800 W 3500 W 2800 W 5200 W 5 5 145-245 245-280 Left rear 2300 W 3200 W 10 125-210 Left front 2300 W 3200 W 10 125-210 EHI977BE Induction 7.
NOTES
NOTES
NOTES
Warranty
Customer Care Center Layanan Langsung Konsumen: 08041119999 PT. Electrolux Indonesia Electrolux Building Jl.Abdul Muis No.34, Petojo Selatan, Gambir Jakarta Pusat 10160 Email:customercare@electrolux.co.id SMS: 0812.8088.8863 WA : 0811.8339.777 Consumer Care Center Tel: 1300-88-11-22 Electrolux Home Appliances Sdn. Bhd. Corporate Office Address: Unit T2-7, 7th Floor, Tower 2, PJ33, No. 3, Jalan Semangat, Seksyen 13, 46200 Petaling Jaya, Selangor.
