Complete user's manual
Table Of Contents
11
Automatic heat up
You can get a necessary heat setting in a shorter time
if you activate the Automatic Heat Up function. This
function sets the highest heat setting for some time (see
the graphic), and then decreases to the necessary heat
setting. To start the Automatic Heat Up function for a
cooking zone:
1. Touch ( comes on in the display).
2.
I mmediately touch the necessary heat setting. After
3 seconds comes on in the display. To stop the
function change the heat setting.
Switching on and off the power function
The Power function makes more power available to the
induction cooking zones. The Power function is activated
for 5 minutes at most. After that the induction cooking
zone automatically switches back to heat setting . To
switch on, touch , comes on. To switch off, touch a
heat setting between and .
Count down timer
Use the Count Down Timer to set how long the cooking
zone operates for one cooking session. Set the Count
Down Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the
timer.
•
To set the cooking zone: touch again and again until
the indicator of the required cooking zone comes on.
•
Starting the Count Down Timer: touch of the
timer to set the time minutes). When the
indicator of the cooking zone flashes slower, the
time counts down.
•
Checking the remaining time: select the cooking zone
with . The indicator of the cooking zone flashes
faster. Display shows the remaining time.
•
Changing the Count Down Timer: select the cooking
zone with touch or .
•
Stopping the timer: select the cooking zone with .
Touch . The remaining time counts backwards to .
The indicator of the cooking zone goes out. To switch
off you can also touch and
at the same time.
• When the time elapses, the sound operates and 00
flashes. The cooking zone switches off.
•
Stopping the sound: touch .
Minute minder
You can use the timer as a Minute Minder while cooking
zones are not operating. Touch . Touch or
of the
timer to select the time. When the time elapses, the sound
operates and 00 flashes.
•
Stopping the sound: touch .