EHI6740XOG EN HOB DE KOCHFELD USER MANUAL BENUTZERINFORMATION 2 20
www.electrolux.com CONTENTS 1. SAFETY INFORMATION...................................................................................... 3 2. SAFETY INSTRUCTIONS.....................................................................................4 3. PRODUCT DESCRIPTION................................................................................... 6 4. DAILY USE.......................................................................................................... 8 5. HINTS AND TIPS...............
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.electrolux.com • • • • • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. Do not use a steam cleaner to clean the appliance. After use, switch off the hob element by its control and do not rely on the pan detector. If the glass ceramic surface / glass surface is cracked, switch off the appliance to avoid the possibility of electric shock.
ENGLISH • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Do not use multi-plug adapters and extension cables. • Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
www.electrolux.com 2.5 Disposal • This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. WARNING! Risk of injury or suffocation. 2.4 Care and cleaning • Contact your municipal authority for information on how to discard the appliance correctly. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it. • Clean regularly the appliance to prevent the deterioration of the surface material.
ENGLISH Sensor field Function Comment 1 STOP+GO To activate and deactivate the function. 2 Bridge To activate and deactivate the function. - Heat setting display To show the heat setting. - Timer indicators of cooking zones To show for which zone you set the time. - Timer display To show the time in minutes. 6 Lock / The Child Safety Device To lock / unlock the control panel. 7 - To select the cooking zone. - To increase or decrease the time.
www.electrolux.com 3.4 OptiHeat Control (3 step Residual heat indicator) WARNING! / / There is a risk of burns from residual heat. The indicator shows the level of the residual heat. The induction cooking zones make the heat necessary for cooking process directly in the bottom of the cookware. The glass ceramic is heated by the heat of the cookware. 4. DAILY USE WARNING! Refer to Safety chapters. Heat setting The hob deactivates after 4.
ENGLISH 4.5 Bridge function 4.8 Timer This function connects two left side cooking zones and they operate as one. Count Down Timer You can use this function to set how long the cooking zone should operate for a single cooking session. First set the heat setting for one of the left side cooking zones. To activate the function: touch . To set or change the heat setting touch one of the control sensors. To deactivate the function: touch . The cooking zones operate independently.
www.electrolux.com To see how long the cooking zone operates: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows how long the zone operates. To deactivate the function: set the and touch or cooking zone with The indicator of the cooking zone goes out. . ). To activate the function: touch . . Do not set the heat setting. for 4 seconds. Deactivate the hob with comes on. . To deactivate the function: activate the Touch .
ENGLISH 4.13 Power management function 11 • The heat setting display of the reduced zones changes between two levels. • Cooking zones are grouped according to the location and number of the phases in the hob. See the illustration. • Each phase has a maximum electricity loading of 3700 W. • The function divides the power between cooking zones connected to the same phase. • The function activates when the total electricity loading of the cooking zones connected to a single phase exceeds 3700 W.
www.electrolux.com operation time depends on the heat setting level and the length of the cooking operation. 5.4 Examples of cooking applications not linear. When you increase the heat setting, it is not proportional to the increase of the cooking zone consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power. The data in the table is for guidance only.
ENGLISH • Use a special scraper for the glass. 13 water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and some detergent. After cleaning, rub the hob dry with a soft cloth. • The surface of the hob has horizontal grooves. Clean the hob with a moist cloth and some detergent with smooth movement from left to right. After cleaning, rub the hob dry with a soft cloth from left to right. 6.
www.electrolux.com Problem Possible cause Remedy Residual heat indicator does not come on. The zone is not hot because it operated only for a short time. If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre. Automatic Heat Up function The zone is hot. does not operate. Let the zone become sufficiently cool. The highest heat setting is set. The highest heat setting has the same power as the function. The heat setting changes between two levels.
ENGLISH Problem 15 Possible cause Remedy comes on. The electrical connection is incorrect. The supply voltage is out of range. Speak to a qualified electrician to check the installation. comes on. There is an error in the hob because a cookware boils dry. Automatic Switch Off and the overheating protection for the zones operate. Deactivate the hob. Remove the hot cookware. After approximately 30 seconds, activate the zone again. If the cookware was the problem, the error message goes out.
www.electrolux.com • To replace the damaged mains cable use the following (or higher) mains cable type: H05BB-F Tmax 90°C. Speak to your local Service Centre. 8.4 Assembly min. 500mm min. 50mm min. 2mm min. 2 mm A min. 2 mm A B < 20 mm > 20 mm min. 500 mm B 57 mm 41 mm 31 mm A 12 mm 28 mm 38 mm B min 30 mm min. 500 mm A 12 mm 28 mm 38 mm B 57 mm 41 mm 31 mm min. 38 mm min. 2 mm R 5mm min.
ENGLISH 17 min. 12 mm min. 2 mm 8.5 Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the protection box if you install the hob above an oven. 9. TECHNICAL INFORMATION 9.1 Rating plate Modell EHI6740XOG Typ 58 GAD DC AU Induction 7.4 kW Ser.Nr. .................
www.electrolux.com 9.2 Cooking zones specification Cooking zone Nominal pow- Power funcer (maximum tion [W] heat setting) [W] Power funcCookware dition maximum ameter [mm] duration [min] Left front 2300 3200 10 125 - 210 Left rear 2300 3200 10 125 - 210 Right front 1400 2500 4 125 - 145 Right rear 1800 2800 10 145 - 180 The power of the cooking zones can be different in some small range from the data in the table. It changes with the material and dimensions of the cookware.
ENGLISH 19 11. ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
www.electrolux.com INHALTSVERZEICHNIS 1. SICHERHEITSINFORMATIONEN....................................................................... 21 2. SICHERHEITSANWEISUNGEN..........................................................................22 3. GERÄTEBESCHREIBUNG................................................................................. 25 4. TÄGLICHER GEBRAUCH.................................................................................. 27 5. TIPPS UND HINWEISE...............................
DEUTSCH 1. 21 SICHERHEITSINFORMATIONEN Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. 1.
www.electrolux.com • • • • • • • • Kochen mit Fett oder Öl auf einem unbeaufsichtigten Kochfeld ist gefährlich und kann zu einem Brand führen. Versuchen Sie nicht einen Brand mit Wasser zu löschen, sondern schalten Sie das Gerät aus und bedecken Sie die Flamme mit einem Deckel oder einer Feuerlöschdecke. Legen Sie keine Gegenstände auf dem Kochfeld ab. Legen Sie keine Metallgegenstände wie Messer, Gabeln, Löffel oder Topfdeckel auf die Oberfläche des Kochfelds, da diese heiß werden können.
DEUTSCH anzubringen, damit der Boden nicht zugänglich ist. • Achten Sie darauf, dass zwischen der Arbeitsplatte und dem Gerät darunter ein Abstand von 2 mm zur Belüftung frei gelassen wird. Schäden, die durch das Fehlen eines Belüftungsabstands entstehen, sind von der Garantie ausgenommen. • • 2.2 Elektrischer Anschluss WARNUNG! Brand- und Stromschlaggefahr. • Alle elektrischen Anschlüsse sind von einem geprüften Elektriker vorzunehmen. • Das Gerät muss geerdet sein.
www.electrolux.com • Legen Sie kein Besteck und keine Topfdeckel auf die Kochzonen. Sie werden heiß. • Bedienen Sie das Gerät nicht mit feuchten oder nassen Händen oder wenn es mit Wasser in Kontakt gekommen ist. • Benutzen Sie das Gerät nicht als Arbeits- oder Abstellfläche. • Hat die Geräteoberfläche einen Sprung, trennen Sie das Gerät umgehend von der Spannungsversorgung. Dies dient zur Vermeidung eines Stromschlags.
DEUTSCH 2.6 Service • Verwenden Sie ausschließlich Originalersatzteile. • Wenden Sie sich zur Reparatur des Geräts an einen autorisierten Kundendienst. 3. GERÄTEBESCHREIBUNG 3.1 Kochfeldanordnung 1 1 Induktionskochzone 2 Bedienfeld 1 180 mm 1 145 mm 1 2 3.2 Bedienfeldanordnung 1 2 3 4 10 11 5 6 9 8 7 Bedienen Sie das Gerät über die Sensorfelder. Die Anzeigen, Kontrolllampen und akustischen Signale informieren Sie über die aktiven Funktionen.
www.electrolux.com Sensorfeld Funktion Anmerkung 6 Tastensperre / Kindersicherung Verriegeln/Entriegeln des Bedienfelds. 7 - Auswählen der Kochzone. - Erhöhen oder Verringern der Zeit. EIN/AUS Ein- und Ausschalten des Kochfeldes. Einstellskala Einstellen der Kochstufe. Power-Funktion Ein- und Ausschalten der Funktion. / 8 9 10 - 11 3.3 Anzeigen der Kochstufen Display Beschreibung Die Kochzone ist ausgeschaltet. Die Kochzone ist eingeschaltet.
DEUTSCH 27 4. TÄGLICHER GEBRAUCH WARNUNG! Siehe Kapitel Sicherheitshinweise. 4.1 Ein- und Ausschalten Berühren Sie 1 Sekunde lang , um das Kochfeld ein- oder auszuschalten. 4.2 Abschaltautomatik Mit dieser Funktion wird das Kochfeld in folgenden Fällen automatisch ausgeschaltet: • Alle Kochzonen sind ausgeschaltet. • Nach dem Einschalten des Kochfelds wird keine Kochstufe gewählt. • Das Bedienfeld ist mehr als 10 Sekunden mit verschütteten Lebensmitteln oder einem Gegenstand bedeckt (Topf, Tuch usw.).
www.electrolux.com Ausschalten der Funktion: Berühren Sie 4.8 Timer . Die Kochzonen arbeiten wieder unabhängig voneinander. Kurzzeitmesser Mit dieser Funktion stellen Sie ein, wie lange eine Kochzone für einen einzelnen Kochvorgang eingeschaltet bleiben soll. Wenn Sie nur eine der beiden Kochzonen verwenden möchten, empfehlen wir Ihnen die hintere Kochzone zu benutzen. Bei der Verwendung von großem Kochgeschirr empfehlen wir Ihnen, das Kochgeschirr in die Nähe der hinteren Kochzone zu stellen. 4.
DEUTSCH Kontrolllampe der Kochzone langsamer blinkt, wird die Zeit hochgezählt. Das Display schaltet um zwischen abgelaufenen Zeit (Minuten). und der So können Sie feststellen, wie lange die Kochzone bereits in Betrieb ist: Wählen Sie die Kochzone mit aus. Die Kontrolllampe der Kochzone blinkt schneller. Im Display wird die Einschaltdauer der Zone angezeigt. Ausschalten der Funktion: Wählen Sie die Kochzone mit und berühren Sie oder . Die Kontrolllampe der Kochzone erlischt.
www.electrolux.com ein- und ausgeschaltet. Berühren Sie 3 Sekunden lang . Es wird angezeigt. Berühren Sie zum Auswählen von: • oder des Timers - Der Signalton ist ausgeschaltet • - Der Signalton ist eingeschaltet Warten Sie, bis das Kochfeld automatisch ausgeschaltet wird, um Ihre Auswahl zu bestätigen.
DEUTSCH 5.2 Betriebsgeräusche Es gibt verschiedene Betriebsgeräusche: • Knacken: Das Kochgeschirr besteht aus unterschiedlichen Materialien (Sandwichkonstruktion). • Pfeifen: Sie haben die Kochzone auf eine hohe Stufe geschaltet und das Kochgeschirr besteht aus unterschiedlichen Materialien (Sandwichkonstruktion). • Summen: Sie haben die Kochzone auf eine hohe Stufe geschaltet. • Klicken: Bei elektronischen Schaltvorgängen. • Zischen, Surren: Der Ventilator läuft.
www.electrolux.com Kochstufe Verwendung: Dauer (Min.) Hinweise 9 - 12 Bei geringer Hitze anbraten: Schnitzel, Cordon bleu, Kotelett, Frikadellen, Bratwürste, Leber, Mehlschwitze, Eier, Pfannkuchen, Donuts. Nach Bedarf Nach der Hälfte der Zeit wenden. 12 - 13 Braten bei starker Hitze: Rösti, Lendenstücke, Steaks. 5 - 15 Nach der Hälfte der Zeit wenden. 14 Aufkochen von Wasser, Nudeln kochen, Anbraten von Fleisch (Gulasch, Schmorbraten), Frittieren von Pommes frites.
DEUTSCH 33 7.1 Was tun, wenn ... Problem Mögliche Ursache Abhilfe Das Kochfeld kann nicht eingeschaltet oder bedient werden. Das Kochfeld ist nicht oder nicht ordnungsgemäß an die Spannungsversorgung angeschlossen. Prüfen Sie, ob das Kochfeld ordnungsgemäß an die Spannungsversorgung angeschlossen ist. Nehmen Sie dazu den Anschlussplan zu Hilfe. Die Sicherung hat ausgelöst. Vergewissern Sie sich, dass die Sicherung der Grund für die Störung ist.
www.electrolux.com Problem Mögliche Ursache Abhilfe Die Kochstufe schaltet zwischen zwei Kochstufen hin und her. Die Funktion Power-Management ist in Betrieb. Siehe Kapitel „Täglicher Gebrauch“. Die Sensorfelder werden heiß. Das Kochgeschirr ist zu groß, oder Sie haben es zu nahe an die Bedienelemente gestellt. Stellen Sie großes Kochgeschirr nach Möglichkeit auf die hinteren Kochzonen. Es ertönt kein Signalton, wenn Sie die Sensorfelder des Bedienfelds berühren.
DEUTSCH Problem 35 Mögliche Ursache Abhilfe leuchtet auf. Ein Fehler ist aufgetreten, weil ein Kochgeschirr leer gekocht ist. Abschaltautomatik und der Überhitzungsschutz für die Kochzone ist eingeschaltet. Schalten Sie das Kochfeld aus. Entfernen Sie das heiße Kochgeschirr. Schalten Sie die Kochzone nach etwa 30 Sekunden wieder ein. Wenn das Kochgeschirr das Problem verursacht hat, erlischt die Fehlermeldung. Restwärmeanzeige kann eingeschaltet bleiben.
www.electrolux.com Seriennummer ............ 8.2 Einbau-Kochfelder Einbau-Kochfelder dürfen nur nach dem Einbau in bzw. unter normgerechte, passende Einbauschränke und Arbeitsplatten betrieben werden. • Ersetzen Sie ein defektes Netzkabel durch ein Netzkabel des folgenden oder eines höheren Typs: H05BB-F Tmax 90°C. Wenden Sie sich an den Kundendienst. 8.3 Anschlusskabel • Das Kochfeld wird mit Anschlusskabel geliefert. 8.4 Montage min. 500mm min. 50mm min. 2mm min. 2 mm A min.
DEUTSCH 37 min. 38 mm min. 2 mm R 5mm min. 55mm 490+1mm 560+1mm min. 12 mm min. 2 mm 8.5 Schutzboden Falls Sie einen Schutzboden (optionales Zubehör) verwenden, ist die Einhaltung des vorderen Belüftungsabstands von 2 mm und die Schutzmatte direkt unter dem Gerät nicht nötig. Der Schutzboden ist möglicherweise in einigen Ländern nicht erhältlich. Wenden Sie sich an Ihren Händler vor Ort. Wenn Sie das Kochfeld über einem Backofen einsetzen, können Sie den Schutzboden nicht verwenden.
www.electrolux.com 9. TECHNISCHE DATEN 9.1 Typenschild Modell EHI6740XOG Typ 58 GAD DC AU Induktion 7.4 kW Ser. Nr. .......... ELECTROLUX Produkt-Nummer (PNC) 949 596 128 00 220 - 240 V, 50 - 60 Hz Made in Germany 7.4 kW 9.2 Technische Daten der Kochzonen Kochzone Nennleistung (höchste Kochstufe) [W] Power-Funktion [W] Power-Funktion maximale Einschaltdauer [Min.
DEUTSCH Energieverbrauch des Kochfelds (EC electric hob) EN 60350-2 - Elektrische Kochgeräte für den Hausgebrauch - Teil 2: Kochfelder Verfahren zur Messung der Gebrauchseigenschaften Die Energiemessungen der Kochflächen wurden an den Kreuzen der entsprechenden Kochzonen vorgenommen. 10.2 Energie sparen 39 173,1 Wh / kg • Decken Sie Kochgeschirr, wenn möglich, mit einem Deckel ab. • Stellen Sie Kochgeschirr auf die Kochzone, bevor Sie sie einschalten.
867317096-A-452014 www.electrolux.