User manual

4.7 Power management
The power management divides the pow-
er between cooking zones (see the illus-
tration). The power function increases the
last selected power to the maximum level
for one cooking zone. The power in other
cooking zones automatically decreases.
The heat setting display for the reduced
zone changes between two levels.
Power management with Power
limitation function
When you set the Power limitation func-
tion to 4.5 kW or less, power of the
appliance is divided between all cook-
ing zone.
When you set the Power limitation func-
tion to more than 4.5 kW, power of
the appliance is divided between two
cooking zones in a pair.
4.8 Power limitation
Originally the appliance is at the highest
possible power level.
Decreasing / increasing the power
level:
1.
Deactivate the appliance.
2.
Touch for 3 seconds. The display
comes on and goes off.
3.
Touch for 3 seconds. or
comes on.
4.
Touch . P0 comes on.
5.
Touch / of the Timer to de-
crease / increase the power level.
Power levels
P0 — 7200 W (Refer to the chapter
“Technical Information”)
P1 — 1500 W
P2 — 2000 W
P3 — 2500 W
P4 — 3000 W
P5 — 3500 W
P6 — 4000 W
P7 — 4500 W
P8 — 5000 W
P9 — 6000 W
CAUTION!
Make sure that the selected pow-
er fits to the house installation
fuses.
4.9 Timer
Count Down Timer
Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Count Down Timer after the
selection of the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the Count Down Timer:
touch
of the timer to set the time (
00
-
99
minutes). When the indicator
of the cooking zone start to flash slow,
the time counts down.
To see the remaining time: set the
cooking zone with
. The indicator of
the cooking zone starts to flash quickly.
The display shows the remaining time.
To change the Count Down Timer:
set the cooking zone with
. Touch
or .
ENGLISH 9