EHI635BD, EHI645BD, EHI667BD, EHI745BD, EHI867BD, EHI955BD, EHI997BD Induction hob Installation & User manual
electrolux.com.au CONGRATULATIONS CONTENTS hank you for purchasing an Electrolux cooktop. T You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Safety information.....................................................3 Welcome to Electrolux. Product description......................................
SAFETY INFORMATION lease read the user manual carefully and store in a handy P place for later reference. Pass the user manual on to possible new owners of the appliance. Read the following carefully to avoid damage or injury. NOTE: You must read these warnings carefully before installing or using the appliance. If you need assistance, contact your Customer Care Department.
electrolux.com.au SAFETY INFORMATION the first time. • D o not put flammable products or items that are wet with flammable products in, near or on the appliance. • D o not try to extinguish a fire with water. Disconnect the appliance and cover the flame with a lid or a fire blanket. WARNING! Risk of damage to the appliance. • T he glass ceramic can be damaged by objects falling onto it. • T he edge of the glass ceramic can be damaged by being knocked by the cookware.
PRODUCT DESCRIPTION EHI635BD EHI645BD 1 3 2 1 4 3 EHI667BD 2 4 5 EHI745BD 1 2 3 4 1 5 3 1 Induction cooking zone 2 Induction cooking zone 3 Induction cooking zone 4 Control panel 5 Induction cooking zone 2 5 4
electrolux.com.
PRODUCT DESCRIPTION (CONTINUED) Control panel layouts EHI635BD 1 2 3 5 4 6 7 8 9 10 EHI645BD 1 2 3 5 Sensor field 4 6 7 8 9 10 Function 1 To activate and deactivate the appliance 2 To lock / unlock the control panel 3 Sets all operating zones to a keep warm setting 4 To activate and deactivate the manual mode of the Hob2Hood function.
electrolux.com.au PRODUCT DESCRIPTION (CONTINUED) Control panel layouts EHI667BD 1 2 3 5 4 7 8 9 10 11 EHI745BD 1 2 3 6 Sensor field 4 7 8 9 10 11 Function 1 To activate and deactivate the appliance 2 To lock / unlock the control panel 3 Sets all operating zones to a keep warm setting 4 To activate and deactivate the manual mode of the Hob2Hood function.
PRODUCT DESCRIPTION (CONTINUED) Control panel layouts EHI867BD 1 2 3 4 5 7 8 9 10 11 EHI955BD 1 2 3 6 9 7 Sensor field 8 4 10 11 Function 1 To activate and deactivate the appliance 2 To lock / unlock the control panel 3 Sets all operating zones to a keep warm setting 4 To activate and deactivate the manual mode of the Hob2Hood function.
electrolux.com.au PRODUCT DESCRIPTION (CONTINUED) Control panel layouts EHI997BD 1 2 3 6 4 7 Sensor field 8 5 9 Function 1 To activate and deactivate the appliance 2 To lock / unlock the control panel 3 To activate and deactivate the function 4 To set the timer function 5 To activate and deactivate the manual mode of the Hob2Hood function.
PRODUCT DESCRIPTION (CONTINUED) Heat setting displays Display Description The cooking zone is deactivated The cooking zone operates The function operates The automatic heat up function operates Power function operates + digit There is a malfunction OptiHeat Control (3 step Residual heat indicator) : continue cook / stay warm / residual heat Lock / The child safety function operates Not correct cookware or too small or no cookware on the cooking zone The automatic switch off function operates OptiH
electrolux.com.au OPERATING INSTRUCTIONS On and off Bridge function Touch for 1 second to activate or deactivate the appliance. IMPORTANT! Use the Bridge Function with the Infinite Plancha accessory1). Automatic switch off The function deactivates the appliance automatically if: • All cooking zones are deactivated ( • You do not set the heat setting after you activate the appliance. • You spill something or put something on the control panel for more than 10 seconds, (a pan, a cloth, etc).
OPERATING INSTRUCTIONS (CONTINUED) Automatic heat up Count down timer Use the Count Down Timer to set how long the cooking zone operates for one cooking session. Set the Count Down Timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer. • To set the cooking zone: touch again and again until the indicator of the required cooking zone comes on. • tarting the Count Down Timer: touch of the S timer to set the time minutes).
electrolux.com.au OPERATING INSTRUCTIONS (CONTINUED) Stop+go Operating the function automatically function sets all cooking zones that operate to the The lowest heat setting ( ). When operates, you cannot change the heat setting. The default automatic mode from the factory is H5. You can change the automatic mode by following the instructions below. When you activate the hob the hood will adjust the fan speed automatically.
OPERATING INSTRUCTIONS (CONTINUED) Flexible Induction Cooking Area WARNING! Refer to Safety chapters. FlexiBridge function The flexible induction cooking area consists of four sections. The sections can be combined into two cooking zones with different size, or into one large cooking area. You choose the combination of the sections by choosing the mode applicable to the size of the cookware you want to use.
electrolux.com.au OPERATING INSTRUCTIONS (CONTINUED) Correct cookware position: Correct cookware position: To use this mode you have to place the cookware on the three connected sections. If you use cookware smaller than two sections the display shows and after 2 minutes the zone switches off. Incorrect cookware position: Incorrect cookware position: FlexiBridge big bridge mode To activate the mode press until you see the correct mode indicator.
OPERATING INSTRUCTIONS (CONTINUED) Correct cookware position: Powerslide Function To use this mode you have to place the cookware on the four connected sections. If you use cookware smaller than three sections the display shows and after 2 minutes the zone switches off. This function allows you to adjust the temperature by moving the cookware to a different position on the induction cooking area. The function divides the induction cooking area into three areas with different heat settings.
electrolux.com.au OPERATING INSTRUCTIONS (CONTINUED) • When you activate the function for the first time you will get heat setting for the front position, for the middle position and for the rear position. You can change the heat settings for each position separately. The hob will remember your heat settings next time you activate the function. Activating the function To activate the function place the cookware in the correct position on the cooking area. Touch .
HELPFUL HINTS AND TIPS Operating the fan speed manually You can also operate the function manually. To do when the hob is active. This deactivates that touch automatic operation of the function and allows you to change the fan speed manually. When you press you raise the fan speed by one. When you reach an intensive level and press again you will set fan speed to 0 which deactivates the hood fan. To start the fan again with fan speed 1 touch .
electrolux.com.au HELPFUL HINTS AND TIPS (CONTINUED) Eco Timer ENVIRONMENT To save energy, the heater of the cooking zone deactivates before the count down timer sounds. The difference in the operation time depends on the heat setting level and the length of the cooking operation. Hints and Tips for Hob²Hood function When you operate the hob with Hob2Hood function: • Protect the hood panel from direct sunlight. • Do not spot halogen light on the hood panel. • Do not cover the hob panel.
HELPFUL HINTS AND TIPS (CONTINUED) Examples of cooking applications The relation between the heat setting and the cooking zone consumption of power is not linear. When you increase the heat setting it is not proportional to the increase of the cooking zone consumption of power. It means that the cooking zone with the medium heat setting uses less than a half of its power. IMPORTANT The data in the table is for guidance only.
electrolux.com.au CARE AND CLEANING Clean the appliance after each use. Always use cookware with clean bottom. 2. Remove after the appliance is sufficiently cool: limescale rings, water rings, fat, stains, shiny metallic discolourations. Use a special cleaning agent for glass ceramic or stainless steel. IMPORTANT Scratches or dark stains on the glass ceramic have no effect on how the appliance operates. 3. Clean the appliance with a moist cloth and some detergent. 4.
TROUBLESHOOTING The sensor fields become hot. The cookware is too large or you put it too near to the controls. Put large cookware on the rear cooking zones if necessary. There is no signal when you touch the panel sensor fields. The signals are deactivated. Activate the signals (refer to “OffSound control”). comes on The automatic switch-off operates. Deactivate the appliance and activate it again. comes on The Child Safety Device or the Lock function operates.
electrolux.com.au INSTALLATION Built-in appliances WARNING! Only use the built-in appliances after you assemble the appliance into correct built-in units and work surfaces that align to the standards. Refer to “Safety information” chapter. IMPORTANT Connection cable BEFORE INSTALLATION Before the installation of the appliance, record the information below from the rating plate. The rating plate is on the bottom of the appliance casing.
TECHNICAL INFORMATION Model. Voltage (volts) 220-240 Ser.Nr. Cycles (Hz) 50-60 ELECTROLUX EHI635BD Induction 7.4kW Cooking zone Nominal Power Power Function (Max heat setting) (W) activated (W) Power function maximum duration (min) Minimum cookware diameter (mm) Right front 1800 W 3500 W 2800 W 5200 W 5 5 145-245 245-280 Left rear 2300 W 3200 W 10 125-210 Left front 2300 W 3200 W 10 125-210 EHI645BD Induction 7.
electrolux.com.au TECHNICAL INFORMATION (CONTINUED) EHI867BD Induction 7.
Warranty 27 FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: ELECTROLUX BUILT-IN OVENS, COOKTOPS AND FREESTANDING COOKER This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This warranty is in addition to other rights you may have under the Australian Consumer Law.
Electrolux Home Products Australia telephone: 1300 363 640 fax: 1800 350 067 email: customercare@electrolux.com.au web: electrolux.com.au Electrolux Home Products New Zealand telephone: 0800 436 245 fax: 0800 225 088 email: customercare@electrolux.co.nz web: electrolux.co.nz To add a touch of professional inspiration to your home, visit electrolux.com.au or electrolux.co.nz electrolux.com.au or electrolux.co.nz P/No. ANC A14095402 Rev.D © 2019 Electrolux Home Products Pty Ltd.
