Dear Customer ! Thank you for purchasing an Electrolyte product. To enable you to use your appliance effectively and safely, please read this instruction book carefully before installing or using the appliance and retain for future reference. f you require guidance in the use of the appliance or require further information on Electrolyte products, contact our Customer Care Department.
Content Instructions for the User [Instructions for the Installer important Safety Information Unpacking and Control Description of the Hob Before the First Use Operating Instructions The Right Cooking Utensils Cleaning and Care Something not Working Service and Spare Parts Customer Care Guarantee Conditions Technical Data {important Safety Requirements installation Electrical Connection 1
Important Safer This Safety Information Is provided in the interests of your safety. Please read it carefully before installing or using the hob. H you are unsure of the meaning of any of the warnings please contact our Customer Care Department. Installation * This appliance must be installed by qualified personnel, according to the manufacturer's instruction and to the relevant British Standards. * Remove all packaging before using the appliance.
Unpacking and Control Please examine the appliance before installation. If the appliance is damaged please immediately contact your retailer before installation. The packing material should be disposed safely, with due regard for the environment.
Operation Heat Control Knobs The control knobs regulate the heating capacity of the cooking zones. The control knobs for the cooking zone ¢an be muted to the left and 1o the right to the desired position. 1 = minimum setting 12 = maximum setting. Setting it back to ,O* turns off the cooking zone, Halo light Cooking Zones This hob is equipped with 2 halo light cocking zones in front of the hob.
The Right Cook in Saucepans and frying pans Saucepans and frying pans should not be smaller than the cooking zone, and preferably not more than 10-15 mim larger than the diameter of the cooking zone. Always use corking and frying utensils with smooth, chat bottoms, The bottoms should always be clean and dry. Coke with laid in place. Check that the bottoms of utensils are smith and undamaged; bottoms with burs and sharp edges will scratch the ceramic glass surface.
Cleaning and Care Before cleaning, make sure the hob is cool and disconnected from the power supply. Never use aggressive or abrasive agents, such as oven sprays, stain or rust removers, scouring powder, or sponges with an abrasive effect. Special cleaning agents such as Hob Brit and ceramic scrapers are available from department stores, electrical specialist shops, and in drug and grocery stores.
Instructions for the Installer Please examine the appliance for any damage. If the appliance is damaged contact your retailer before the appliance is connected. Please keep packaging away from children and dispose of with due regard for the environment. Technical Data EHO603K/W/B Hob dimensions: length: 572 mm depth: 502 mm height: 49 mm Cut out dimensions: length: 560 mm e depth: 490 mm Total max, 6.0 kW Voltage 230V -50Hz Total power: 6,0 kW We reserve the right to make technical changes. Iota] max. 6.
The minimum distance combustible material can be fitted above the hob in line with the edges of the hob is 420 fitted below 420 mm a space of 55 mm must be allowed from the edges of the hob. The minimum distance combustible material can be fitted directly above the hob is 700 mm., This appliance conforms to Type Y (IEC 335-2-6) with regard to fire protection.
Electrical connections Before connecting the appliance, check that the voltage quoted on the rating plate that's, the nominal voltage of the appliance corresponds fo the available mains voltage. The rating piste can be found on the dower housing of the ceramic glass hab. The main connection must be carried out by an expert electrician. The VIE-regulations and the valid prescriptions by the local power supp boards have to be compiled with.
Something not working 1f your hob is not functioning correctly please carry out the following checks before calling out an engineer. important: If you call out an engineer to a fault sited below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
Guarantee Conditions Standard guarantee conditions We, Electrolyte, undertake that if within 12 months of the date of the purchase this Electrolyte appliance or any part thereof is proved 1o be defective by reason only of fruit workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labor, materials or carriage on condition that: * The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.