user manual Ceramic glass hob EHP60060K
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS 2 3 5 5 Helpful hints and tips 6 Care and cleaning 6 What to do if… 7 Environment concerns 7 Subject to change without notice For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance.
electrolux 3 INSTALLATION INSTRUCTIONS Before the installation , note down the serial number (Ser. Nr.) from the rating plate. The rating plate of the appliance is on its lower casing. 949 594 074 01 EHP 60060K 58 PEE 05 AO 220-240 V 50-60 Hz 6,4 kW ELECTROLUX Safety instructions Warning! You must read these! Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier.
electrolux Assembly min. 50 mm R 5mm min. 500 mm min. 50 mm = 600mm 490+1mm 560+1mm = min. 25 mm min. 20 mm min. 28 mm If you use a protection box (additional accessory), the protective floor directly below the appliance is not necessary.
electrolux 5 PRODUCT DESCRIPTION Cooking surface layout 1 2 145 180 mm mm 120/210 145 mm 6 3 mm 5 1 2 3 4 5 6 Single cooking zone 1200 W Single cooking zone 1800 W Control Knobs Single cooking zone 1200 W Residual heat indicators Double ring cooking zone 750/2200 W 4 Hob cooking zone control knob 1 1 Assignment of control knobs 2 Heat setting (0-12) 3 Connection double ring cooking zone 2 3 Residual heat indicator The residual heat indicator comes on when a cooking zone is hot.
electrolux HELPFUL HINTS AND TIPS Cookware • The bottom of the cookware must be as thick and flat as possible. • Cookware made of enamelled steel and with aluminium or copper bottoms can cause discoloration on glass ceramic surface. Energy saving • If possible, always put the lids on the cookware. Heat setting Use to: • Put cookware on a cooking zone before you start it. • Stop the cooking zones before the end of the cooking time to use residual heat.
electrolux 7 the glass . Put the scraper on the glass surface at an acute angle and move the blade on the surface . – Remove after the appliance is sufficiently cool: limescale rings , water rings, fat stains, shiny metallic discol- orations. Use a special cleaning agent for glass ceramic or stainless steel. 2. Clean the appliance with a moist cloth and some detergent. 3. At the end rub the appliance dry with a clean cloth.
www.electrolux.