user manual Ceramic glass hob EHS60180P
electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information Installation Description of the appliance Operating the appliance 2 3 5 6 Helpful hints and tips 8 Care and cleaning 9 What to do if... 9 Environment concerns 10 Subject to change without notice SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before installation and use.
electrolux 3 INSTALLATION Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The rating plate of the appliance is on its lower casing. 949 594 179 00 EHS60180P 58 HAD 53 AO 220-240 V 50-60 Hz 6,4 kW ELECTROLUX Safety instructions Warning! You must read these! Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier.
electrolux Assembly min. 500mm min. 50mm R 5mm min. 50mm = 600mm 490+1mm 560+1mm = min. 25 mm min. 20 mm min.
electrolux 5 DESCRIPTION OF THE APPLIANCE Cooking surface layout 1 145 5 2 mm /210 /175 120 /180 120 mm 145 mm mm 1 2 3 4 5 3 Single cooking zone 1200 W Double cooking zone 700/1700 W Single cooking zone 1200 W Control panel Triple cooking zone 800/1600/2300 W 4 Control panel layout 1 2 11 3 10 4 9 5 6 8 Use the sensor fields to operate the appliance. Displays, indicators and sounds tell which functions operate.
electrolux Heat setting displays Display Description The cooking zone is off , The cooking zone operates - The automatic heat-up function is on There is a malfunction A cooking zone is still hot (residual heat) Lock/Child safety function is on The automatic switch off is on Residual heat indicator Warning! Risk of burns from residual heat! OPERATING THE APPLIANCE • you cover a sensor field with an object (a pan, a cloth, etc.) for longer than 10 seconds.
electrolux 7 The automatic heat up function The automatic heat up function starts when you set a heat setting starting from .A cooking zone operates with the maximum power for some time and than automatically switches back to the heat setting you set. If you set a higher heat setting during the to automatic heat up (for example from ), the automatic heat up is adjusted. If there is still residual heat on the cooking ), the automatic warm up zone (display does not start.
electrolux Starting the child safety device • Start the hob with . Do not set the heat settings. • Touch until the acoustic signal. . The comes on. Switch off the apsymbol pliance. Switching off the child safety device • Start the hob with . comes on. Touch until the acoustic signal. comes on • Switch off the appliance. Overriding the child safety device for one cooking session • Start the hob with . The symbol comes on. • Touch until the acoustic signal. The comes on.
electrolux 9 Information on acrylamides Important! According to the newest scientific knowledge, if you brown food (specially the one which contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at the lowest temperatures and do not brown food too much. CARE AND CLEANING Clean the appliance after each use. Always use cookware with clean bottom. Warning! Sharp objects and abrasive cleaning agents will damage the appliance.
electrolux Problem Possible cause and remedy The automatic heat up function does not start. • There is still residual heat on the cooking zone . Let the cooking zone cool down • The highest heat setting is set. The highest heat setting has the same power as the automatic heat up function. • You set the heat setting with sensor field. Start from and use only. A sound operates and appliance starts and stops again. After 5 seconds one more sound operates. You covered . Uncover the sensor field.
electrolux 11
www.electrolux.