User manual

Heat setting displays
Display Description
The cooking zone is off
, -
The cooking zone operates
The automatic heat-up function is on
There is a malfunction
A cooking zone is still hot (residual heat)
Lock/Child safety function is on
The automatic switch off is on
Residual heat indicator
Warning! Risk of burns from
residual heat!
OPERATING THE APPLIANCE
On and Off
Touch
for 2 seconds to start the appli-
ance. Touch
for 1 second to stop the
appliance.
Automatic Switch Off
The function stops the hob
automatically if:
all cooking zones are off
.
you do not set the heat setting after you
start the hob.
you cover a sensor field with an object (a
pan, a cloth, etc.) for longer than 10 sec-
onds. The sound operates some time
and the hob stops. Remove the object or
clean the control panel.
you do not stop a cooking zone or
change the heat setting. After some time
comes on and the hob stops. See the
table.
Automatic Switch Off times
Heat setting
, - - -
Stops after
6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch
to increase the heat setting.
Touch
to decrease the heat setting. The
display shows the heat setting. Touch
and at the same time to switch off the
cooking zone.
/ Switching the outer rings on
and off
You can match the effective heating surface
to the size of the cookware.
To switch on the outer ring touch the sen-
sor field
/ . The indicator comes on.
For more outer rings touch the same sen-
sor field again. The next indicator comes
on.
Do the procedure again to switch off the
outer ring. The indicator goes out.
6 electrolux