User manual

The automatic heat up function
The automatic heat up function starts when
you set a heat setting starting from
. A
cooking zone operates with the maximum
power for some time and than automatical-
ly switches back to the heat setting you
set.
If you set a higher heat setting during the
automatic heat up (for example from
to
), the automatic heat up is adjusted.
If there is still residual heat on the cooking
zone (display
), the automatic warm up
does not start.
The time of the automatic warm up
changes for different heat settings:
1
2
3
4
5
6
7
8
9
10
11
0
123456789
Using the Timer
Use the timer to set how long the cooking
zone operates for one cooking session.
Set the timer after the selection of the
cooking zone.
You can set the heat setting before or after
you set the timer.
• Selection of the cooking zone:touch
again and again until the indicator of a
necessary cooking zone comes on.
• Starting or changing the timer: touch
or of the timer to set the time (
00
-
99
minutes). When the indicator of the
cooking zone flashes slower, the time
counts down.
• Stopping the timer: select the cooking
zone with
and touch to switch off
the timer. The remaining time counts
backwards to
00
. The indicator of the
cooking zone goes out.
• Checking the remaining time: select
the cooking zone with
. The indicator
of the cooking zone flashes faster. Dis-
play shows the remaining time.
When the time elapses, the sound operates
and
00
flashes. The cooking zone switches
off.
•
Stopping the sound: touch
You can use the timer as a minute minder
while cooking zones do not operate. Touch
. Touch + or - to select the time. When
the time elapses, the sound operates and
00
flashes
Starting the STOP+GO
The
function sets all cooking zones that
operate to a keep warm setting.
•
Touch
to start this function. The
symbol
comes on.
•
Touch
to stop this function. The heat
setting that you set before comes on.
does not stop the timer function.
locks the control bars.
Locking / unlocking the control panel
You can lock the control panel, but not
.
It prevents an accidental change of the heat
setting during a cooking session.
First set the heat setting.
Touch the symbol
. The symbol
comes on for 4 seconds.
The Timer still operates.
Touch the symbol
to switch off this func-
tion. The heat setting that you set before
comes on.
When you switch off the appliance, you also
switch off this function.
The child safety device
This function prevents an accidental opera-
tion of the hob.
electrolux 7