User manual

22
Some operating problems may be solved with simple maintenance operations or and
without the intervention of Technical Assistance.
Something not working
f SOLUTION
fHave the fuses replaced.
fReset the switches.
fTouch the main ON/OFF
Control
.
fOpen the tap.
f
Purchase a new bottle.
fAllow the top to cool (see
par. “Protection against
overheating”).
f Deactivate the Child
Safety function (see par.
“Child Safety Function”).
f
Wait 60 seconds, then
follow the instructions
given in chapter: “In case
of ignition failure”.
f Check the correct
position (see par. “In case
of ignition failure”).
f Follow the instructions
given in the section
“Cleaning and
maintenance”.
f Contact an authorized
technical assistance
centre.
fSee the section “How to
light a burner”
PROBLEM
THE HOB
DOESN’T
WORK
A BURNER
DOESN’T
WORK
IT TAKES TOO LONG
TO FINISH THE
DISHES / THEY
ARE COOKED
TOO FAST.
CAUSE
z There are blown fuses in the
domestic electrical system.
Switches are turned off or
there is no power at the
power outlet.
z The hob is not activated.
z The main gas supply tap is
closed.
z The gas bottle is empty.
z The hob has overheated and
a safety device has been set
on the four burners.
z The Child Safety function
has been inadvertently
activated.
z The safety device has been
set on the burner due to
repeated ignition failures.
The flame level indicators
and the residual heat
indicator flash.
z The pan support or the
burner cap and crown were
not correctly positioned
after cleaning.
zThe burner crown holes are
obstructed.
z The defect persists.
z The flame level adjustment
is not appropriate.